SODIUM DODECYLBENZENESULFONATE (BRANCHED CHAIN)
![](javascript:dropDownText("section1_info","section1_info_marker","/static/images/up_arrow.png","/static/images/down_arrow.png")){kind=icon}
![](javascript:dropDownText("sec1_help","sec1_help_marker","/static/images/dropdown_opened.gif","/static/images/dropdown_closed.gif"))
The
Chemical Identifier fields
include common identification numbers, the
NFPA diamond
U.S. Department of Transportation hazard labels, and a general
description of the chemical. The information in CAMEO Chemicals comes
from a variety of
data sources.
| CAS Number | UN/NA Number |
|---|---|
|
none |
| DOT Hazard Label | USCG CHRIS Code |
| data unavailable | |
| NIOSH Pocket Guide | International Chem Safety Card |
| none |
NFPA 704
data unavailable
General Description
Sodium dodecylbenzenesulfonate is a white to light yellow flakes, granules or powder. It is soluble in water. The primary hazard is the threat to the environment. Immediate steps should be taken to limit its spread to the environment. It is used as a synthetic detergent.
![](javascript:dropDownText("section2_info","section2_info_marker","/static/images/up_arrow.png","/static/images/down_arrow.png")){kind=icon}
![](javascript:dropDownText("sec2_help","sec2_help_marker","/static/images/dropdown_opened.gif","/static/images/dropdown_closed.gif"))
The
Hazard fields
include
special hazard alerts
air and water
reactions, fire hazards, health hazards, a reactivity profile, and
details about
reactive groups assignments
and
potentially incompatible absorbents.
The information in CAMEO Chemicals comes from a variety of
data sources.
Reactivity Alerts
none
Air & Water Reactions
It is soluble in water.
Fire Hazard
No information available.
Health Hazard
Minor skin and eye irritant. INGESTION: May cause vomiting, diarrhea, and intestinal distension. (USCG, 1999)
Reactivity Profile
SODIUM DODECYLBENZENESULFONATE is incompatible with strong oxidizers. (NTP, 1992)
Belongs to the Following Reactive Group(s)
Potentially Incompatible Absorbents
No information available.
![](javascript:dropDownText("section3_info","section3_info_marker","/static/images/up_arrow.png","/static/images/down_arrow.png")){kind=icon}
![](javascript:dropDownText("sec3_help","sec3_help_marker","/static/images/dropdown_opened.gif","/static/images/dropdown_closed.gif"))
The
Response Recommendation fields
include isolation and evacuation distances, as well as recommendations for
firefighting, non-fire response, protective clothing, and first aid. The
information in CAMEO Chemicals comes from a variety of
data sources.
Isolation and Evacuation
No information available.
Firefighting
No information available.
Non-Fire Response
No information available.
Protective Clothing
Rubber gloves, safety glasses. (USCG, 1999)
DuPont Tychem® Suit Fabrics
No information available.
First Aid
EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.
SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.
INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing.
INGESTION: If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)
SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.
INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing.
INGESTION: If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)
![](javascript:dropDownText("section4_info","section4_info_marker","/static/images/up_arrow.png","/static/images/down_arrow.png")){kind=icon}
![](javascript:dropDownText("sec4_help","sec4_help_marker","/static/images/dropdown_opened.gif","/static/images/dropdown_closed.gif"))
The
Physical Property fields
include properties such as vapor pressure and
boiling point, as well as explosive limits and
toxic exposure thresholds
The information in CAMEO Chemicals comes from a variety of
data sources.
Note: For Vapor Density and Specific Gravity, comparing the value to 1.0 can tell you if the chemical will likely sink/rise in air or sink/float in fresh water (respectively). Short phrases have been added to those values below as an aid. However, make sure to also consider the circumstances of a release. The Vapor Density comparisons are only valid when the gas escaping is at the same temperature as the surrounding air itself. If the chemical is escaping from a container where it was pressurized or refrigerated, it may first escape and behave as a heavy gas and sink in the air (even if it has a Vapor Density value less than 1). Also, the Specific Gravity comparisons are for fresh water (density 1.0 g/mL). If your spill is in salt water (density about 1.027 g/mL), you need to adjust the point of comparison. There are some chemicals that will sink in fresh water and float in salt water.
Note: For Vapor Density and Specific Gravity, comparing the value to 1.0 can tell you if the chemical will likely sink/rise in air or sink/float in fresh water (respectively). Short phrases have been added to those values below as an aid. However, make sure to also consider the circumstances of a release. The Vapor Density comparisons are only valid when the gas escaping is at the same temperature as the surrounding air itself. If the chemical is escaping from a container where it was pressurized or refrigerated, it may first escape and behave as a heavy gas and sink in the air (even if it has a Vapor Density value less than 1). Also, the Specific Gravity comparisons are for fresh water (density 1.0 g/mL). If your spill is in salt water (density about 1.027 g/mL), you need to adjust the point of comparison. There are some chemicals that will sink in fresh water and float in salt water.
| Chemical Formula: |
|
Flash Point:
greater than 200°F
(NTP, 1992)
Lower Explosive Limit (LEL): data unavailable
Upper Explosive Limit (UEL): data unavailable
Autoignition Temperature: data unavailable
Melting Point:
greater than 572°F
(NTP, 1992)
Vapor Pressure: data unavailable
Vapor Density (Relative to Air):
greater than 1
(NTP, 1992)
Specific Gravity:
1
at 68°F
for 60% slurry
(USCG, 1999)
Boiling Point:
Foams as water boils. 212°F
(USCG, 1999)
Molecular Weight:
348.49
(NTP, 1992)
Water Solubility:
5 to 10 mg/mL
at 66°F
(NTP, 1992)
Ionization Energy/Potential: data unavailable
IDLH: data unavailable
AEGLs (Acute Exposure Guideline Levels)
No AEGL information available.ERPGs (Emergency Response Planning Guidelines)
No ERPG information available.PACs (Protective Action Criteria)
| Chemical | PAC-1 | PAC-2 | PAC-3 |
|---|---|---|---|
| Sodium dodecylbenzenesulfonate; (Dodecyl benzene sodium sulfonate) (25155-30-0) | 2.1 mg/m3 | 23 mg/m3 | 87 mg/m3 |
(DOE, 2018)
![](javascript:dropDownText("section5_info","section5_info_marker","/static/images/up_arrow.png","/static/images/down_arrow.png")){kind=icon}
![](javascript:dropDownText("sec5_help","sec5_help_marker","/static/images/dropdown_opened.gif","/static/images/dropdown_closed.gif"))
The
Regulatory Information fields
include information from
the U.S. Environmental Protection Agency's Title III Consolidated List of
Lists,
the U.S. Cybersecurity and Infrastructure Security Agency's Chemical Facility
Anti-Terrorism Standards,
and the U.S. Occupational Safety and Health Administration's
Process Safety Management of Highly Hazardous Chemicals Standard List
(see more about these
data sources).
EPA Consolidated List of Lists
| Regulatory Name | CAS Number/ 313 Category Code |
EPCRA 302 EHS TPQ |
EPCRA 304 EHS RQ |
CERCLA RQ | EPCRA 313 TRI |
RCRA Code |
CAA 112(r) RMP TQ |
|---|---|---|---|---|---|---|---|
| Sodium dodecylbenzenesulfonate | 25155-30-0 | 1000 pounds |
(EPA List of Lists, 2022)
CISA Chemical Facility Anti-Terrorism Standards (CFATS)
No regulatory information available.OSHA Process Safety Management (PSM) Standard List
No regulatory information available.![](javascript:dropDownText("section6_info","section6_info_marker","/static/images/up_arrow.png","/static/images/down_arrow.png")){kind=icon}
![](javascript:dropDownText("sec6_help","sec6_help_marker","/static/images/dropdown_opened.gif","/static/images/dropdown_closed.gif"))
This section provides a listing of alternate names for this chemical,
including trade names and synonyms.
- A 1-1575
- AA-10
- AA-9
- ABESON NAM
- ALKANATE DC
- ARYLAN SBC
- BENZENESULFONIC ACID, DODECYL-, SODIUM SALT
- BIO-SOFT D 35X
- BIO-SOFT D 40
- BIO-SOFT D 62
- BIO-SOFT D-35X
- BIO-SOFT D-40
- BIO-SOFT D-60
- BIO-SOFT D-62
- BIO-SOFT LAS 40S
- C 550
- C 560
- CAFLON NAS 30
- CAFLON SNA
- CALSOFT 90F
- CALSOFT F 90
- CALSOFT F-90
- CALSOFT L 40
- CALSOFT L 60
- CALSOFT L-40
- CALSOFT L-60
- CONCO AAS 35
- CONCO AAS 35H
- CONCO AAS 40S
- CONCO AAS 45S
- CONCO AAS-35
- CONCO AAS-40
- CONCO AAS-65
- CONCO AAS-90
- CONOCO C 550
- CONOCO C-50
- CONOCO C-60
- CONOCO SD 40
- DETERGENT HD-90
- DETERLON
- DETERLON A
- DOBANIC 560
- DOBS
- DODECYL BENZENE SODIUM SULFONATE
- DODECYL BENZENE SULFONIC ACID, SODIUM SALT
- DODECYLBENZENESULFONATE SODIUM SALT
- DODECYLBENZENESULFONATE, SODIUM SALT
- DODECYLBENZENESULFONIC ACID SODIUM SALT
- DODECYLBENZENESULFONIC ACID, SODIUM SALT
- DODECYLBENZENESULPHONATE, SODIUM SALT
- DS 60
- DS 60 (SURFACTANT)
- ELECAT S 412
- ELFAN WA 35
- ELFAN WA 50
- ELFAN WA POWDER
- EMULIN B 22
- F 90
- F 90 (SULFONIC ACID)
- FAW 01
- HS 85S
- KB
- KB (SURFACTANT)
- LIPONOX LE 110
- MARANIL
- MARANIL A
- MARANIL A 55
- MARLON 375
- MARLON 375A
- MARLON A
- MARLON A 350
- MARLON A 365
- MARLON A 375
- MARLON A 396
- MB-VR
- MERCOL 25
- MERCOL 30
- MERPISAP AP 85W
- MERPISAP AP 90P
- NACCANOL NR
- NACCANOL NR OR SW
- NACCANOL SW
- NACCONOL 35SL
- NACCONOL 40F
- NACCONOL 40G
- NACCONOL 90F
- NACCONOL 90G
- NANSA 1106
- NANSA 1169P
- NANSA 1260
- NANSA HF 80
- NANSA HS 80
- NANSA HS 80S
- NANSA HS 80SA
- NANSA HS 85S
- NANSA HS 90S
- NANSA SL
- NANSA SS
- NANSA SSA 055
- NECCANOL SW
- NEOGEN S 20
- NEOGEN SC
- NEOPELEX 05
- NEOPELEX 25
- NEOPELEX 6
- NEOPELEX 6E
- NEOPELEX F 25
- NEOPELEX F 60
- NEOPELEX F 65
- NEOPELEX FS
- NEOPELEX N 6
- NESTAPONE
- NEWCOL 220L
- NEWLEX POWDER F
- NEWLEX R
- NEWLEX SOFT 60N
- NEWREX R
- NEWREX T
- NISSAN NEWREX F
- NISSAN NEWREX H
- NISSAN NEWREX R
- NISSAN NEWREX SOFT 60
- NISSAN NEWREX T
- OROMIN O
- PELOPON A
- PHENYL SULFONATE HSR
- PILOT HD-90
- PILOT SF-40
- PILOT SF-40B
- PILOT SF-40FG
- PILOT SF-60
- PILOT SF-96
- PILOT SP-60
- PIONIN A 41S
- POLYSTEP A 15
- POLYSTEP A 7
- REWORYL NKS 50
- RHODACAL DS 10
- RHODACAL DS 4
- RICHONATE 1850
- RICHONATE 40B
- RICHONATE 45B
- RICHONATE 60B
- SANDET 60
- SANTOMERSE 3
- SANTOMERSE ME
- SANTOMERSE NO. 1
- SANTOMERSE NO. 85
- SDBS
- SINNOZON
- SIPONATE DS 10
- SIPONATE DS 4
- SIPONATE LDS 10
- 35SL
- SODIUM DODECYLBENZENE SULFONATE
- SODIUM DODECYLBENZENESULFONATE
- SODIUM DODECYLBENZENESULFONATE (BRANCHED CHAIN)
- SODIUM DODECYLBENZENESULFONATE, DRY
- SODIUM DODECYLBENZENESULPHONATE
- SODIUM DODECYLBENZENESULPHONATE (BRANCHED CHAIN)
- SODIUM DODECYLPHENYLSULFONATE
- SODIUM LAURYLBENZENESULFONATE
- SODIUM LAURYLPHENYLSULFONATE
- SOLAR 40
- SOLAR 90
- SORPOL DBNA
- STEINARYL NKS 100
- STEINARYL NKS 50
- STEPAN DS 60
- STEPANTAN DS 40
- SULFAPOL
- SULFARIL PASTE
- SULFRAMIN 1238 SLURRY
- SULFRAMIN 1240
- SULFRAMIN 1250 SLURRY
- SULFRAMIN 40
- SULFRAMIN 40 FLAKES
- SULFRAMIN 40 GRANULAR
- SULFRAMIN 40RA
- SULFRAMIN 85
- SULFRAMIN 90 FLAKES
- SULFURIL 50
- TEIKAPAWA BN 2060M
- TREPOLATE F 40
- TREPOLATE F 95
- ULTRAWET 1T
- ULTRAWET 60K
- ULTRAWET 99LS
- ULTRAWET K
- ULTRAWET KX
- ULTRAWET SK
- VISTA C 550
- VISTA C 560
- VISTA SA 597
- WITCONATE 1238
- WITCONATE 1240
- WITCONATE 1250
- WITCONATE 1260
- WITCONATE 60B
- WITCONATE 90
- WITCONATE K
- X 2073
Version 3.0.0