Get the app in the App Store and on Google Play!

CHLORDANE

3 - Flammable liquid 6.1 - Poison
Add to MyChemicals

The Chemical Identifier fields include common identification numbers, the NFPA diamond U.S. Department of Transportation hazard labels, and a general description of the chemical. The information in CAMEO Chemicals comes from a variety of data sources.
CAS Number UN/NA Number
  • 57-74-9   (mixed isomers)
  • 5103-71-9   (alpha isomer)
  • 5103-74-2   (gamma isomer)
  • 12789-03-6   (mixed isomers)
DOT Hazard Label USCG CHRIS Code
  • Flammable Liquid
  • Poison
NIOSH Pocket Guide International Chem Safety Card
Chlordaneexternal_link
NFPA 704
data unavailable
General Description
It is a solid when pure, however, it is often formulated as a solution in organic solvents which may be flammable. Generally denser than water and insoluble in water. Vapors heavier than air. Toxic by inhalation, ingestion, or skin absorption. Formerly used as a pesticide but it has been banned in the US since 1988.

The Hazard fields include special hazard alerts air and water reactions, fire hazards, health hazards, a reactivity profile, and details about reactive groups assignments and potentially incompatible absorbents. The information in CAMEO Chemicals comes from a variety of data sources.
Reactivity Alerts
  • Highly Flammable
Air & Water Reactions
Solutions of this material in organic solvents are often highly flammable. Insoluble in water.
Fire Hazard
Flammable/combustible material; may be ignited by heat, sparks or flames. Vapors may travel to a source of ignition and flash back. Run-off to sewers may create fire or explosion hazard. Containers may explode in heat of fire. Vapors are toxic indoors and outdoors. Chlordane degrades under natural environmental conditions to photoisomers, such as photo-cis- chlordane, which are more toxic to certain animals than chlordane and also showed higher bioaccumulation. Loses chlorine in presence of alkaline reagents; should not be formulated with any solvent, carrier, diluent or emulsifier which has alkaline reaction. (EPA, 1998)
Health Hazard
Fatal oral dose to adult humans is between 6 and 60 g with onset of symptoms within 45 minutes to several hours after ingestion, although symptoms have occurred following very small doses either orally or by skin exposure. Some reports of delayed development of liver disease, blood disorders and upset stomach. Chlordane is considered to be borderline between a moderately and highly toxic substance. (EPA, 1998)
Reactivity Profile
CHLORDANE is a chlorinated cyclodiene (unsaturated hydrocarbon). Decomposes in base. Corrosive to iron and zinc. Can react with strong oxidizing agents. Attack some plastics, rubbers and coatings (NTP, 1992).
Belongs to the Following Reactive Group(s)
Potentially Incompatible Absorbents

Use caution: Liquids with this reactive group classification have been known to react with the absorbent listed below. More info about absorbents, including situations to watch out for...

  • Dirt/Earth

The Response Recommendation fields include isolation and evacuation distances, as well as recommendations for firefighting, non-fire response, protective clothing, and first aid. The information in CAMEO Chemicals comes from a variety of data sources.
Isolation and Evacuation
Excerpt from ERG Guide 131 [Flammable Liquids - Toxic]:

IMMEDIATE PRECAUTIONARY MEASURE: Isolate spill or leak area for at least 50 meters (150 feet) in all directions.

SPILL: Increase the immediate precautionary measure distance, in the downwind direction, as necessary.

FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2020)
Firefighting
Isolate hazard area and deny entry. Stay upwind. Wear positive pressure breathing apparatus and special protective clothing. Isolate for 1/2-mile in all directions if tank car or truck is involved in the fire.

Small fires: dry chemical, carbon dioxide, water spray, and foam. Large fires: water spray, fog, or foam. Move containers from fire area if it can be done without risk. Cool containers that are exposed to flames with water from the side until well after fire is out. (EPA, 1998)
Non-Fire Response
Excerpt from ERG Guide 131 [Flammable Liquids - Toxic]:

ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area. All equipment used when handling the product must be grounded. Do not touch or walk through spilled material. Stop leak if you can do it without risk. Prevent entry into waterways, sewers, basements or confined areas. A vapor-suppressing foam may be used to reduce vapors.

SMALL SPILL: Absorb with earth, sand or other non-combustible material and transfer to containers for later disposal. Use clean, non-sparking tools to collect absorbed material.

LARGE SPILL: Dike far ahead of liquid spill for later disposal. Water spray may reduce vapor, but may not prevent ignition in closed spaces. (ERG, 2020)
Protective Clothing
Excerpt from NIOSH Pocket Guide for Chlordaneexternal link:

Skin: PREVENT SKIN CONTACT - Wear appropriate personal protective clothing to prevent skin contact.

Eyes: PREVENT EYE CONTACT - Wear appropriate eye protection to prevent eye contact.

Wash skin: WHEN CONTAMINATED - The worker should immediately wash the skin when it becomes contaminated.

Remove: WHEN WET OR CONTAMINATED - Work clothing that becomes wet or significantly contaminated should be removed and replaced.

Change: DAILY - Workers whose clothing may have become contaminated should change into uncontaminated clothing before leaving the work premises.

Provide:
• EYEWASH - Eyewash fountains should be provided in areas where there is any possibility that workers could be exposed to the substances; this is irrespective of the recommendation involving the wearing of eye protection.
• QUICK DRENCH - Facilities for quickly drenching the body should be provided within the immediate work area for emergency use where there is a possibility of exposure. [Note: It is intended that these facilities provide a sufficient quantity or flow of water to quickly remove the substance from any body areas likely to be exposed. The actual determination of what constitutes an adequate quick drench facility depends on the specific circumstances. In certain instances, a deluge shower should be readily available, whereas in others, the availability of water from a sink or hose could be considered adequate.] (NIOSH, 2023)
DuPont Tychem® Suit Fabrics
Tychem® Fabric Legend
QS = Tychem 2000 SFR
QC = Tychem 2000
SL = Tychem 4000
C3 = Tychem 5000
TF = Tychem 6000
TP = Tychem 6000 FR
RC = Tychem RESPONDER® CSM
TK = Tychem 10000
RF = Tychem 10000 FR
Testing Details
The fabric permeation data was generated for DuPont by a third party laboratory. Permeation data for industrial chemicals is obtained per ASTM F739. Normalized breakthrough times (the time at which the permeation rate exceeds 0.1 μg/cm2/min) are reported in minutes. All chemicals have been tested between approximately 20°C and 27°C unless otherwise stated. All chemicals have been tested at a concentration of greater than 95% unless otherwise stated.
Chemical warfare agents (Lewisite, Sarin, Soman, Sulfur Mustard, Tabun and VX Nerve Agent) have been tested at 22°C and 50% relative humidity per military standard MIL-STD-282. "Breakthrough time" for chemical warfare agents is defined as the time when the cumulative mass which permeated through the fabric exceeds the limit in MIL-STD-282 [either 1.25 or 4.0 μg/cm2].
A Caution from DuPont
This information is based upon technical data that DuPont believes to be reliable on the date issued. It is subject to revision as additional knowledge and experience are gained. The information reflects laboratory performance of fabrics, not complete garments, under controlled conditions. It is intended for informational use by persons having technical skill for evaluation under their specific end-use conditions, at their own discretion and risk. It is the user's responsibility to determine the level of toxicity and the proper personal protective equipment needed. Anyone intending to use this information should first verify that the garment selected is suitable for the intended use. In many cases, seams and closures have shorter breakthrough times and higher permeation rates than the fabric. If fabric becomes torn,abraded or punctured, or if seams or closures fail, or if attached gloves, visors, etc. are damaged, end user should discontinue use of garment to avoid potential exposure to chemical. Since conditions of use are outside our control, DuPont makes no warranties, express or implied, including, without limitation, no warranties of merchantability or fitness for a particular use and assume no liability in connection with any use of this information. This information is not intended as a license to operate under or a recommendation to infringe any patent, trademark or technical information of DuPont or others covering any material or its use.
Normalized Breakthrough Times (in Minutes)
Chemical CAS Number State QS QC SL C3 TF TP RC TK RF
Chlordane (44%) 57-74-9 Liquid >480
Chlordane (60-75%) 57-74-9 Liquid >480 >480 >480
> indicates greater than.

Special Warning from DuPont: Tychem® and Tyvek® fabrics should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Only...

...Tychem® ThermoPro, Tychem® Reflector® and Tychem® TK styles 600T/601T (with aluminized outer suit) garments are designed and tested to help reduce burn injury during escape from a flash fire. Users of Tychem® ThermoPro, Tychem® Reflector® and Tychem® TK styles 600T/601T (with aluminized outer suit) garments should not knowingly enter an explosive environment. Tychem® garments with attached socks must be worn inside protective outer footwear and are not suitable as outer footwear. These attached socks do not have adequate durability or slip resistance to be worn as the outer foot covering.

(DuPont, 2023)

First Aid
Signs and Symptoms of Acute Chlordane exposure: Signs and symptoms of acute exposure to chlordane may be severe and include headache, dizziness, increased sensitivity to stimuli, agitation, nervousness, tremor, seizures, and coma. Convulsive episodes may alternate with periods of severe central nervous system depression. Nausea, vomiting, and diarrhea are common. Hypertension (high blood pressure), tachycardia (rapid heart rate), and cardiac arrhythmias (abnormal heart beating) may be noted. Respiratory depression may lead to respiratory arrest. Contact with the skin, eyes, and mucous membranes may result in redness and irritation. Victims often have an elevated temperature.

Emergency Life-Support Procedures: Acute exposure to chlordane may require decontamination and life support for the victims. Emergency personnel should wear protective clothing appropriate to the type and degree of contamination. Air-purifying or supplied-air respiratory equipment should also be worn, as necessary. Rescue vehicles should carry supplies such as plastic sheeting and disposable plastic bags to assist in preventing spread of contamination.

Inhalation Exposure:
1. Move victims to fresh air. Emergency personnel should avoid self-exposure to chlordane.
2. Evaluate vital signs including pulse and respiratory rate, and note any trauma. If no pulse is detected, provide CPR. If not breathing, provide artificial respiration. If breathing is labored, administer oxygen or other respiratory support.
3. Obtain authorization and/or further instructions from the local hospital for administration of an antidote or performance of other invasive procedures.
4. Transport to a health care facility.

Dermal/Eye Exposure:
1. Remove victims from exposure. Emergency personnel should avoid self-exposure to chlordane.
2. Evaluate vital signs including pulse and respiratory rate, and note any trauma. If no pulse is detected, provide CPR. If not breathing, provide artificial respiration. If breathing is labored, administer oxygen or other respiratory support.
3. Remove contaminated clothing as soon as possible.
4. If eye exposure has occurred, eyes must be flushed with lukewarm water for at least 15 minutes.
5. Wash exposed skin areas three times. Wash initially with soap and water, follow with an alcohol wash, then again with soap and water.
6. Obtain authorization and/or further instructions from the local hospital for administration of an antidote or performance of other invasive procedures.
7. Transport to a health care facility.

Ingestion Exposure:
1. Evaluate vital signs including pulse and respiratory rate, and note any trauma. If no pulse is detected, provide CPR. If not breathing, provide artificial respiration. If breathing is labored, administer oxygen or other respiratory support.
2. Obtain authorization and/or further instructions from the local hospital for administration of an antidote or performance of other invasive procedures.
3. Vomiting may be induced with syrup of Ipecac. If elapsed time since ingestion of chlordane is unknown or suspected to be greater than 30 minutes, do not induce vomiting and proceed to Step
4. Ipecac should not be administered to children under 6 months of age.Warning: Ingestion of chlordane may result in sudden onset of seizures or loss of consciousness. Syrup of Ipecac should be administered only if victims are alert, have an active gag-reflex, and show no signs of impending seizure or coma. If ANY uncertainty exists, proceed to Step
4.The following dosages of Ipecac are recommended: children up to 1 year old, 10 mL (1/3 oz); children 1 to 12 years old, 15 mL (1/2 oz); adults, 30 mL (1 oz). Ambulate (walk) the victims and give large quantities of water. If vomiting has not occurred after 15 minutes, Ipecac may be readministered. Continue to ambulate and give water to the victims. If vomiting has not occurred within 15 minutes after second administration of Ipecac, administer activated charcoal.
4. Activated charcoal may be administered if victims are conscious and alert. Use 15 to 30 g (1/2 to 1 oz) for children, 50 to 100 g (1-3/4 to 3-1/2 oz) for adults, with 125 to 250 mL (1/2 to 1 cup) of water.
5. Promote excretion by administering a saline cathartic or sorbitol to conscious and alert victims. Children require 15 to 30 g (1/2 to 1 oz) of cathartic; 50 to 100 g (1-3/4 to 3- 1/2 oz) is recommended for adults.
6. Transport to a health care facility. (EPA, 1998)

The Physical Property fields include properties such as vapor pressure and boiling point, as well as explosive limits and toxic exposure thresholds The information in CAMEO Chemicals comes from a variety of data sources.

Note: For Vapor Density and Specific Gravity, comparing the value to 1.0 can tell you if the chemical will likely sink/rise in air or sink/float in fresh water (respectively). Short phrases have been added to those values below as an aid. However, make sure to also consider the circumstances of a release. The Vapor Density comparisons are only valid when the gas escaping is at the same temperature as the surrounding air itself. If the chemical is escaping from a container where it was pressurized or refrigerated, it may first escape and behave as a heavy gas and sink in the air (even if it has a Vapor Density value less than 1). Also, the Specific Gravity comparisons are for fresh water (density 1.0 g/mL). If your spill is in salt water (density about 1.027 g/mL), you need to adjust the point of comparison. There are some chemicals that will sink in fresh water and float in salt water.
Chemical Formula:
  • C10H6Cl8
Flash Point: data unavailable
Lower Explosive Limit (LEL): Flammable/combustible. (EPA, 1998)
Upper Explosive Limit (UEL): Flammable/combustible. (EPA, 1998)
Autoignition Temperature: 410°F (USCG, 1999)
Melting Point: 223-225°F (cis); 219-221°F (trans) (NTP, 1992)
Vapor Pressure: 1e-05 mmHg at 77°F (EPA, 1998)
Vapor Density (Relative to Air): 14 (NTP, 1992) - Heavier than air; will sink
Specific Gravity: 1.56 to 1.57 at 77 °F (EPA, 1998)
Boiling Point: 347°F at 2 mmHg (EPA, 1998)
Molecular Weight: 409.8 (EPA, 1998)
Water Solubility: 0.0001 % (NIOSH, 2023)
Ionization Energy/Potential: data unavailable
IDLH: 100 mg/m3 ; A potential occupational carcinogen. (NIOSH, 2023)

AEGLs (Acute Exposure Guideline Levels)

No AEGL information available.

ERPGs (Emergency Response Planning Guidelines)

No ERPG information available.

PACs (Protective Action Criteria)

Chemical PAC-1 PAC-2 PAC-3
Chlordane (57-74-9) 4.5 mg/m3 50 mg/m3 500 mg/m3
(DOE, 2018)

The Regulatory Information fields include information from the U.S. Environmental Protection Agency's Title III Consolidated List of Lists, the U.S. Cybersecurity and Infrastructure Security Agency's Chemical Facility Anti-Terrorism Standards, and the U.S. Occupational Safety and Health Administration's Process Safety Management of Highly Hazardous Chemicals Standard List (see more about these data sources).

EPA Consolidated List of Lists

Regulatory Name CAS Number/
313 Category Code
EPCRA 302
EHS TPQ
EPCRA 304
EHS RQ
CERCLA RQ EPCRA 313
TRI
RCRA
Code
CAA 112(r)
RMP TQ
4,7-Methanoindan, 1,2,3,4,5,6,7,8,8-octachloro-2,3,3a,4,7,7a-hexahydro- 57-74-9 1000 pounds 1 pound 1 pound X U036
Chlordane 57-74-9 1000 pounds 1 pound 1 pound 313 U036
Chlordane (Technical Mixture and Metabolites) 57-74-9 1 pound U036
Chlordane, alpha isomer 5103-71-9 1000 pounds 1 pound 1 pound 313 U036
Chlordane, gamma isomer 5103-74-2 1000 pounds 1 pound 1 pound 313 U036

(EPA List of Lists, 2022)

CISA Chemical Facility Anti-Terrorism Standards (CFATS)

No regulatory information available.

OSHA Process Safety Management (PSM) Standard List

No regulatory information available.

This section provides a listing of alternate names for this chemical, including trade names and synonyms.
  • 1068
  • ASPON-CHLORDANE
  • BELT
  • CD 68
  • CHLOR KIL
  • CHLORDAN
  • CHLORDANE
  • CHLORDANE (TECHNICAL MIXTURE AND METABOLITES)
  • CHLORDANO
  • CHLORINDAN
  • CHLOROTOX
  • CORODAN
  • CORODANE
  • CORTILAN-NEU
  • DOWCHLOR
  • ENT 9,932
  • ENT 9932
  • ENT-9932
  • HCS 3260
  • INTOX
  • INTOX (INSECTICIDE)
  • KYPCHLOR
  • M 140
  • M 410
  • 4,7-METHANO-1H-INDENE, 1,2,4,5,6,7,8,8-OCTACHLORO-2,3,3A,4,7,7A- HEXAHYDRO-
  • 4,7-METHANOINDAN, 1,2,4,5,6,7,8,8-OCTACHLORO-3A,4,7,7A-TETRAHYDRO-
  • 4,7-METHANOINDAN,
  • NCI-C00099
  • NIRAN
  • OCTA-KLOR
  • OCTACHLOR
  • OCTACHLORDANE
  • OCTACHLORO- 4,7-METHANOTETRAHYDROINDANE
  • 1,2,4,5,6,7,8,8-OCTACHLORO-2,3,3A,4,7,7A-HEXAHYDRO-4,7- METHANOINDENE
  • 1,2,4,5,6,7,8,8-OCTACHLORO-2,3,3A,4,7,7A-HEXAHYDRO-4,7-METHANOINDENE
  • 1,2,4,5,6,7,8,8-OCTACHLORO-3A,4,7,7A-HEXAHYDRO-4,7-METHYLENE INDANE
  • 1,2,4,5,6,7,8,8-OCTACHLORO-3A,4,7,7A-TETRAHYDRO-4,7-METHANOINDANE
  • OCTACHLORO-4,7-METHANOHYDROINDANE
  • OCTACHLORO-4,7-METHANOTETRAHYDROINDANE
  • OCTACHLORODIHYDRODICYCLOPENTADIENE
  • OKTATERR
  • ORTHO-KLOR
  • STARCHLOR
  • SYDANE
  • SYNKLOR
  • TAT CHLOR 4
  • TECHNICAL CHLORDANE
  • TERMEX
  • TOPICLOR
  • TOXICHLOR
  • UNEXAN-KOEDER
  • VELSICOL 1068

Version 3.0.0