Get the app in the App Store and on Google Play!

CRESYLATE SPENT CAUSTIC SOLUTION

Add to MyChemicals

The Chemical Identifier fields include common identification numbers, the NFPA diamond U.S. Department of Transportation hazard labels, and a general description of the chemical. The information in CAMEO Chemicals comes from a variety of data sources.
CAS Number UN/NA Number
none none
DOT Hazard Label USCG CHRIS Code
data unavailable
NIOSH Pocket Guide International Chem Safety Card
none none
NFPA 704
data unavailable
General Description
A liquid. (USCG, 1999)

The Hazard fields include special hazard alerts air and water reactions, fire hazards, health hazards, a reactivity profile, and details about reactive groups assignments and potentially incompatible absorbents. The information in CAMEO Chemicals comes from a variety of data sources.
Reactivity Alerts
none
Air & Water Reactions
Water soluble. May generate large amounts of heat when dissolved in water.
Fire Hazard
Special Hazards of Combustion Products: Contain toxic and corrosive fumes of sodium monoxide (Na 2 O).

Behavior in Fire: Noncombustible; however, if heated to dryness, resulting soilds may ignite spontaneously in air to yield toxic and corrosive fumes containing sodium monoxide (Na 2 O). (USCG, 1999)
Health Hazard
Inhalation of mist may be harmful. Contact causes burns to eyes and skin. Caustic; harmful if swallowed. (USCG, 1999)
Reactivity Profile
Incompatible with copper, copper alloys, zinc or aluminum (USCG, 1999). Combustion products contain toxic and corrosive fumes of sodium monoxide (Na2O).
Belongs to the Following Reactive Group(s)
Potentially Incompatible Absorbents

No information available.

The Response Recommendation fields include isolation and evacuation distances, as well as recommendations for firefighting, non-fire response, protective clothing, and first aid. The information in CAMEO Chemicals comes from a variety of data sources.
Isolation and Evacuation
No information available.
Firefighting
Fire Extinguishing Agents Not to Be Used: Do not use dry chemicals containing ammonium salts or urea. These compounds may react with the caustic solution to generate toxic ammonia gas.

Fire Extinguishing Agents: Small fires: dry chemical (no ammonium salts or urea), carbon dioxide, water spray or foam; large fires: water spray, fog or foam. (Spilled material may ignite if allowed to dry.) (USCG, 1999)
Non-Fire Response
No information available.
Protective Clothing
Wear self-contained (positive pressure if available) breathing apparatus and full protective clothing. (USCG, 1999)
DuPont Tychem® Suit Fabrics
No information available.
First Aid
INHALATION: Move victim to fresh air. If breathing has stopped, give artificial respiration. If breathing is difficult, give oxygen.

EYES OR SKIN: Flush with running water for at least 15 min.; hold eyelids open if necessary. Remove and isolate contaminated clothing and shoes at the site.

INGESTION: If victim is conscious, have victim drink water or milk. DO NOT INDUCE VOMITING. If victim is unconscious or having convulsions, do nothing except keep victim warm. (USCG, 1999)

The Physical Property fields include properties such as vapor pressure and boiling point, as well as explosive limits and toxic exposure thresholds The information in CAMEO Chemicals comes from a variety of data sources.

Note: For Vapor Density and Specific Gravity, comparing the value to 1.0 can tell you if the chemical will likely sink/rise in air or sink/float in fresh water (respectively). Short phrases have been added to those values below as an aid. However, make sure to also consider the circumstances of a release. The Vapor Density comparisons are only valid when the gas escaping is at the same temperature as the surrounding air itself. If the chemical is escaping from a container where it was pressurized or refrigerated, it may first escape and behave as a heavy gas and sink in the air (even if it has a Vapor Density value less than 1). Also, the Specific Gravity comparisons are for fresh water (density 1.0 g/mL). If your spill is in salt water (density about 1.027 g/mL), you need to adjust the point of comparison. There are some chemicals that will sink in fresh water and float in salt water.
Chemical Formula: data unavailable
Flash Point: data unavailable
Lower Explosive Limit (LEL): data unavailable
Upper Explosive Limit (UEL): data unavailable
Autoignition Temperature: data unavailable
Melting Point: data unavailable
Vapor Pressure: data unavailable
Vapor Density (Relative to Air): data unavailable
Specific Gravity: data unavailable
Boiling Point: data unavailable
Molecular Weight: data unavailable
Water Solubility: data unavailable
Ionization Energy/Potential: data unavailable
IDLH: data unavailable

AEGLs (Acute Exposure Guideline Levels)

No AEGL information available.

ERPGs (Emergency Response Planning Guidelines)

No ERPG information available.

PACs (Protective Action Criteria)

No PAC information available.

The Regulatory Information fields include information from the U.S. Environmental Protection Agency's Title III Consolidated List of Lists, the U.S. Cybersecurity and Infrastructure Security Agency's Chemical Facility Anti-Terrorism Standards, and the U.S. Occupational Safety and Health Administration's Process Safety Management of Highly Hazardous Chemicals Standard List (see more about these data sources).

EPA Consolidated List of Lists

No regulatory information available.

CISA Chemical Facility Anti-Terrorism Standards (CFATS)

No regulatory information available.

OSHA Process Safety Management (PSM) Standard List

No regulatory information available.

This section provides a listing of alternate names for this chemical, including trade names and synonyms.
  • CRESYLATE SPENT CAUSTIC
  • CRESYLATE SPENT CAUSTIC SOLUTION

Version 3.0.0