Get the app in the App Store and on Google Play!

NICKEL CARBONYL

6.1 - Poison Inhalation Hazard 3 - Flammable liquid
Add to MyChemicals

The Chemical Identifier fields include common identification numbers, the NFPA diamond U.S. Department of Transportation hazard labels, and a general description of the chemical. The information in CAMEO Chemicals comes from a variety of data sources.
CAS Number UN/NA Number
  • 13463-39-3   (NICKEL CARBONYL)
DOT Hazard Label USCG CHRIS Code
  • Poison Inhalation Hazard
  • Flammable Liquid
NIOSH Pocket Guide International Chem Safety Card
Nickel carbonylexternal_link
NFPA 704
Diamond Hazard Value Description
3
4 3
Blue Health 4 Can be lethal.
Red Flammability 3 Can be ignited under almost all ambient temperature conditions.
Yellow Instability 3 Capable of detonation or explosive decomposition or explosive reaction but requires a strong initiating source or must be heated under confinement before initiation.
White Special
(NFPA, 2010)
General Description
A clear colorless to yellow liquid. Boiling point 43°C. Flash point below 0°F. Very toxic by ingestion and inhalation. Carcinogenic. Denser than water and insoluble in water. Vapors heavier than air. Used to nickel coat steel and other metals and to make very pure nickel.

The Hazard fields include special hazard alerts air and water reactions, fire hazards, health hazards, a reactivity profile, and details about reactive groups assignments and potentially incompatible absorbents. The information in CAMEO Chemicals comes from a variety of data sources.
Reactivity Alerts
  • Pyrophoric
  • Peroxidizable Compound
Air & Water Reactions
Highly flammable over a wide range of vapor-air concentrations. Is peroxidized by air to give a solid deposit that tends to decompose and ignite. Insoluble in water.
Fire Hazard
Vapor forms explosive mixtures with air. Vapor is heavier than air and may travel a considerable distance to source of ignition and flash back. Liquid may explode when heated under confinement. Vapor explosion and poison hazard indoors, outdoors, or in sewers. Runoff to sewer may create fire and explosion. May explode at 68F in presence of air or oxygen. Avoid contact with heat, acid or acid fumes as these cause the emission of highly toxic fumes. Avoid contact with air, ignition sources and vapors entering a confined space. (EPA, 1998)
Health Hazard
Probable oral lethal dose for a human is between 50 and 500 mg/kg, between one teaspoon and one ounce per 150 lb. person. Nickel carbonyl has also been estimated to be lethal in man at atmospheric exposures of 30 ppm for 20 minutes. Autopsies show congestion, collapse, and tissue destruction, as well as hemorrhage in the brain. Dermatitis, recurrent asthmatic attacks, and increased number of white blood cells (eosinophils) in respiratory tract are acute health hazards. Nickel carbonyl is poisonous. It can be fatal if inhaled, swallowed, or absorbed through skin. Vapors may cause irritation, congestion, and edema of lungs. (EPA, 1998)
Reactivity Profile
NICKEL CARBONYL is easily oxidized. Presents a very serious fire hazard if exposed to heat, flame, sparks, oxidizing agents. Explodes when heated to about 60°C. Reacts explosively with bromine (liquid), oxygen in the presence of mercury, or hydrocarbons (butane) mixed with oxygen. Undergoes violent reactions with air, oxygen, dinitrogen tetraoxide. Caused an explosion when added to an n-butane-oxygen at 20-40°C [J. Am. Chem. Soc. 70:2055-6. 1948]. Reacts with tetrachloropropadiene to form an extremely explosive dinickel chloride dimer. Emits highly toxic fumes of carbon monoxide when heated to decomposition or in contact with mineral acids or acid fumes [Bretherick, 5th ed., 1995, p. 1734]. Vapor explodes in air or oxygen at 20°C and a partial pressure of 15 mm.
Belongs to the Following Reactive Group(s)
Potentially Incompatible Absorbents

No information available.

The Response Recommendation fields include isolation and evacuation distances, as well as recommendations for firefighting, non-fire response, protective clothing, and first aid. The information in CAMEO Chemicals comes from a variety of data sources.
Isolation and Evacuation
Excerpt from ERG Guide 131 [Flammable Liquids - Toxic]:

IMMEDIATE PRECAUTIONARY MEASURE: Isolate spill or leak area for at least 50 meters (150 feet) in all directions.

SPILL: See ERG Table 1 - Initial Isolation and Protective Action Distances on the UN/NA 1259 datasheet.

FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2020)
Firefighting
Material is too dangerous to health to expose fire fighters. A few whiffs of the vapor could cause death. If liquid or vapor penetrates fire fighter's protective gear it will cause fatality. Normal full protective gear available to the average fire department will not provide adequate inhalation or skin protection.

Use water, alcohol foam, carbon dioxide, dry chemical. Use water in flooding quantities as fog. Solid streams of water may be ineffective. (EPA, 1998)
Non-Fire Response
Excerpt from ERG Guide 131 [Flammable Liquids - Toxic]:

ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area. All equipment used when handling the product must be grounded. Do not touch or walk through spilled material. Stop leak if you can do it without risk. Prevent entry into waterways, sewers, basements or confined areas. A vapor-suppressing foam may be used to reduce vapors.

SMALL SPILL: Absorb with earth, sand or other non-combustible material and transfer to containers for later disposal. Use clean, non-sparking tools to collect absorbed material.

LARGE SPILL: Dike far ahead of liquid spill for later disposal. Water spray may reduce vapor, but may not prevent ignition in closed spaces. (ERG, 2020)
Protective Clothing
Excerpt from NIOSH Pocket Guide for Nickel carbonylexternal link:

Skin: PREVENT SKIN CONTACT - Wear appropriate personal protective clothing to prevent skin contact.

Eyes: PREVENT EYE CONTACT - Wear appropriate eye protection to prevent eye contact.

Wash skin: WHEN CONTAMINATED - The worker should immediately wash the skin when it becomes contaminated.

Remove: WHEN WET (FLAMMABLE) - Work clothing that becomes wet should be immediately removed due to its flammability hazard (i.e., for liquids with a flash point <100°F).

Change: No recommendation is made specifying the need for the worker to change clothing after the workshift.

Provide:
• EYEWASH - Eyewash fountains should be provided in areas where there is any possibility that workers could be exposed to the substances; this is irrespective of the recommendation involving the wearing of eye protection.
• QUICK DRENCH - Facilities for quickly drenching the body should be provided within the immediate work area for emergency use where there is a possibility of exposure. [Note: It is intended that these facilities provide a sufficient quantity or flow of water to quickly remove the substance from any body areas likely to be exposed. The actual determination of what constitutes an adequate quick drench facility depends on the specific circumstances. In certain instances, a deluge shower should be readily available, whereas in others, the availability of water from a sink or hose could be considered adequate.] (NIOSH, 2023)
DuPont Tychem® Suit Fabrics
Tychem® Fabric Legend
QS = Tychem 2000 SFR
QC = Tychem 2000
SL = Tychem 4000
C3 = Tychem 5000
TF = Tychem 6000
TP = Tychem 6000 FR
RC = Tychem RESPONDER® CSM
TK = Tychem 10000
RF = Tychem 10000 FR
Testing Details
The fabric permeation data was generated for DuPont by a third party laboratory. Permeation data for industrial chemicals is obtained per ASTM F739. Normalized breakthrough times (the time at which the permeation rate exceeds 0.1 μg/cm2/min) are reported in minutes. All chemicals have been tested between approximately 20°C and 27°C unless otherwise stated. All chemicals have been tested at a concentration of greater than 95% unless otherwise stated.
Chemical warfare agents (Lewisite, Sarin, Soman, Sulfur Mustard, Tabun and VX Nerve Agent) have been tested at 22°C and 50% relative humidity per military standard MIL-STD-282. "Breakthrough time" for chemical warfare agents is defined as the time when the cumulative mass which permeated through the fabric exceeds the limit in MIL-STD-282 [either 1.25 or 4.0 μg/cm2].
A Caution from DuPont
This information is based upon technical data that DuPont believes to be reliable on the date issued. It is subject to revision as additional knowledge and experience are gained. The information reflects laboratory performance of fabrics, not complete garments, under controlled conditions. It is intended for informational use by persons having technical skill for evaluation under their specific end-use conditions, at their own discretion and risk. It is the user's responsibility to determine the level of toxicity and the proper personal protective equipment needed. Anyone intending to use this information should first verify that the garment selected is suitable for the intended use. In many cases, seams and closures have shorter breakthrough times and higher permeation rates than the fabric. If fabric becomes torn,abraded or punctured, or if seams or closures fail, or if attached gloves, visors, etc. are damaged, end user should discontinue use of garment to avoid potential exposure to chemical. Since conditions of use are outside our control, DuPont makes no warranties, express or implied, including, without limitation, no warranties of merchantability or fitness for a particular use and assume no liability in connection with any use of this information. This information is not intended as a license to operate under or a recommendation to infringe any patent, trademark or technical information of DuPont or others covering any material or its use.
Normalized Breakthrough Times (in Minutes)
Chemical CAS Number State QS QC SL C3 TF TP RC TK RF
Nickel carbonyl 13463-39-3 Liquid >480
Tetracarbonylnickel 13463-39-3 Liquid >480
> indicates greater than.

Special Warning from DuPont: Tychem® and Tyvek® fabrics should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Only...

...Tychem® ThermoPro, Tychem® Reflector® and Tychem® TK styles 600T/601T (with aluminized outer suit) garments are designed and tested to help reduce burn injury during escape from a flash fire. Users of Tychem® ThermoPro, Tychem® Reflector® and Tychem® TK styles 600T/601T (with aluminized outer suit) garments should not knowingly enter an explosive environment. Tychem® garments with attached socks must be worn inside protective outer footwear and are not suitable as outer footwear. These attached socks do not have adequate durability or slip resistance to be worn as the outer foot covering.

(DuPont, 2023)

First Aid
Warning: Effects usually occur in two stages: immediate and delayed. Delayed effects may begin hours to days after exposure. Caution is advised.

Signs and Symptoms of Acute Nickel Carbonyl Exposure: Acute exposure to nickel carbonyl may result in dizziness, giddiness, weakness, convulsions, hallucinations, delirium, nausea, vomiting, and diarrhea. Following inhalation, respiration will initially be rapid, accompanied by a nonproductive cough, and followed by pain and tightness in the chest. Pulmonary edema, cerebral edema, and hepatic (liver) degeneration may also occur. Vapor is irritating to the eyes, nose, and throat. Nickel contact dermatitis is the most common reaction to nickel carbonyl. Nickel itch may begin with a burning sensation and itching, often followed by erythema (redness) and nodular eruptions. Liquid nickel carbonyl will burn the skin and eyes.

Emergency Life-Support Procedures: Acute exposure to nickel carbonyl may require decontamination and life support for the victims. Emergency personnel should wear protective clothing appropriate to the type and degree of contamination. Air-purifying or supplied-air respiratory equipment should also be worn, as necessary. Rescue vehicles should carry supplies such as plastic sheeting and disposable plastic bags to assist in preventing spread of contamination.

Inhalation Exposure:
1. Move victims to fresh air. Emergency personnel should avoid self-exposure to nickel carbonyl.
2. Evaluate vital signs including pulse and respiratory rate, and note any trauma. If no pulse is detected, provide CPR. If not breathing, provide artificial respiration. If breathing is labored, administer oxygen or other respiratory support.
3. Obtain authorization and/or further instructions from the local hospital for administration of an antidote or performance of other invasive procedures.
4. RUSH to a health care facility.

Dermal/Eye Exposure:
1. Remove victims from exposure. Emergency personnel should avoid self- exposure to nickel carbonyl.
2. Evaluate vital signs including pulse and respiratory rate, and note any trauma. If no pulse is detected, provide CPR. If not breathing, provide artificial respiration. If breathing is labored, administer oxygen or other respiratory support.
3. Remove contaminated clothing as soon as possible.
4. If eye exposure has occurred, eyes must be flushed with lukewarm water for at least 15 minutes.
5. Wash exposed skin areas twice with soap and water.
6. Obtain authorization and/or further instructions from the local hospital for administration of an antidote or performance of other invasive procedures.
7. RUSH to a health care facility.

Ingestion Exposure:
1. Evaluate vital signs including pulse and respiratory rate, and note any trauma. If no pulse is detected, provide CPR. If not breathing, provide artificial respiration. If breathing is labored, administer oxygen or other respiratory support.
2. Obtain authorization and/or further instructions from the local hospital for administration of an antidote or performance of other invasive procedures.
3. Give the victims water or milk: children up to 1 year old, 125 mL (4 oz or 1/2 cup); children 1 to 12 years old, 200 mL (6 oz or 3/4 cup); adults, 250 mL (8 oz or 1 cup). Water or milk should be given only if victims are conscious and alert.
4. Activated charcoal may be administered if victims are conscious and alert. Use 15 to 30 g (1/2 to 1 oz) for children, 50 to 100 g (1-3/4 to 3-1/2 oz) for adults, with 125 to 250 mL (1/2 to 1 cup) of water.
5. Promote excretion by administering a saline cathartic or sorbitol to conscious and alert victims. Children require 15 to 30 g (1/2 to 1 oz) of cathartic; 50 to 100 g (1-3/4 to 3-1/2 oz) is recommended for adults.
6. RUSH to a health care facility. (EPA, 1998)

The Physical Property fields include properties such as vapor pressure and boiling point, as well as explosive limits and toxic exposure thresholds The information in CAMEO Chemicals comes from a variety of data sources.

Note: For Vapor Density and Specific Gravity, comparing the value to 1.0 can tell you if the chemical will likely sink/rise in air or sink/float in fresh water (respectively). Short phrases have been added to those values below as an aid. However, make sure to also consider the circumstances of a release. The Vapor Density comparisons are only valid when the gas escaping is at the same temperature as the surrounding air itself. If the chemical is escaping from a container where it was pressurized or refrigerated, it may first escape and behave as a heavy gas and sink in the air (even if it has a Vapor Density value less than 1). Also, the Specific Gravity comparisons are for fresh water (density 1.0 g/mL). If your spill is in salt water (density about 1.027 g/mL), you need to adjust the point of comparison. There are some chemicals that will sink in fresh water and float in salt water.
Chemical Formula:
  • Ni(CO)4
Flash Point: Less than -18C (EPA, 1998)
Lower Explosive Limit (LEL): 2 % Flammable and burns with a yellow flame. (EPA, 1998)
Upper Explosive Limit (UEL): Flammable and burns with a yellow flame. (EPA, 1998)
Autoignition Temperature: less than 200°F (USCG, 1999)
Melting Point: -2.2°F (EPA, 1998)
Vapor Pressure: 400 mmHg at 78.44°F (EPA, 1998)
Vapor Density (Relative to Air): 5.89 (EPA, 1998) - Heavier than air; will sink
Specific Gravity: 1.318 at 62.6°F (EPA, 1998) - Denser than water; will sink
Boiling Point: 109°F at 760 mmHg (EPA, 1998)
Molecular Weight: 170.75 (EPA, 1998)
Water Solubility: 0.05 % (NIOSH, 2023)
Ionization Energy/Potential: 8.28 eV (NIOSH, 2023)
IDLH: 2 ppm ; A potential occupational carcinogen. (NIOSH, 2023)

AEGLs (Acute Exposure Guideline Levels)

Final AEGLs for Nickel carbonyl (13463-39-3)
Exposure Period AEGL-1 AEGL-2 AEGL-3
10 minutes NR 0.1 ppm 0.46 ppm
30 minutes NR 0.072 ppm 0.32 ppm
60 minutes NR 0.036 ppm 0.16 ppm
4 hours NR 0.009 ppm 0.04 ppm
8 hours NR 0.0045 ppm 0.02 ppm
NR = Not recommended due to insufficient data
(NAC/NRC, 2023)

ERPGs (Emergency Response Planning Guidelines)

No ERPG information available.

PACs (Protective Action Criteria)

Chemical PAC-1 PAC-2 PAC-3
Nickel carbonyl (13463-39-3) 0.0033 ppm 0.036 ppm 0.16 ppm LEL = 20000 ppm
(DOE, 2018)

The Regulatory Information fields include information from the U.S. Environmental Protection Agency's Title III Consolidated List of Lists, the U.S. Cybersecurity and Infrastructure Security Agency's Chemical Facility Anti-Terrorism Standards, and the U.S. Occupational Safety and Health Administration's Process Safety Management of Highly Hazardous Chemicals Standard List (see more about these data sources).

EPA Consolidated List of Lists

Regulatory Name CAS Number/
313 Category Code
EPCRA 302
EHS TPQ
EPCRA 304
EHS RQ
CERCLA RQ EPCRA 313
TRI
RCRA
Code
CAA 112(r)
RMP TQ
Nickel Compounds N495 & 313
Nickel carbonyl 13463-39-3 1 pound 10 pounds 10 pounds 313c P073 1000 pounds

(EPA List of Lists, 2022)

CISA Chemical Facility Anti-Terrorism Standards (CFATS)

RELEASE THEFT SABOTAGE
Chemical of Interest CAS Number Min Conc STQ Security
Issue
Min Conc STQ Security
Issue
Min Conc STQ Security
Issue
Nickel Carbonyl 13463-39-3 1.00 % 10000 pounds flammable

(CISA, 2007)

OSHA Process Safety Management (PSM) Standard List

Chemical Name CAS Number Threshold Quantity (TQ)
Nickel Carbonly (Nickel Tetracarbonyl) 13463-39-3 150 pounds

(OSHA, 2019)

This section provides a listing of alternate names for this chemical, including trade names and synonyms.
  • NICKEL CARBONYL
  • NICKEL CARBONYL (NI(CO)4)
  • NICKEL CARBONYL[NI(CO)4],(T-4)-
  • NICKEL TETRACARBONYL
  • TETRACARBONYL NICKEL
  • TETRACARBONYLNICKEL
  • TETRACARBONYLNICKEL(0)

Version 3.0.0