Get the app in the App Store and on Google Play!

AZODICARBONAMIDE

4.1 - Flammable solid
Add to MyChemicals

The Chemical Identifier fields include common identification numbers, the NFPA diamond U.S. Department of Transportation hazard labels, and a general description of the chemical. The information in CAMEO Chemicals comes from a variety of data sources.
CAS Number UN/NA Number
  • 123-77-3
DOT Hazard Label USCG CHRIS Code
  • Flammable Solid
none
NIOSH Pocket Guide International Chem Safety Card
none
NFPA 704
data unavailable
General Description
A yellow to orange powder. Insoluble in water and common solvents. Soluble in dimethyl sulfoxide. Nontoxic.

The Hazard fields include special hazard alerts air and water reactions, fire hazards, health hazards, a reactivity profile, and details about reactive groups assignments and potentially incompatible absorbents. The information in CAMEO Chemicals comes from a variety of data sources.
Reactivity Alerts
  • Highly Flammable
  • Explosive
Air & Water Reactions
Highly flammable. Water insoluble. Dust may form an explosive mixture in air.
Fire Hazard
Excerpt from ERG Guide 149 [Substances (Self-Reactive)]:

Self-decomposition, self-polymerization, or self-ignition may be triggered by heat, chemical reaction, friction or impact. May be ignited by heat, sparks or flames. Some may decompose explosively when heated or involved in a fire. Those substances designated with a (P) may polymerize explosively when heated or involved in a fire. May burn violently. Decomposition or polymerization may be self-accelerating and produce large amounts of gases. Vapors or dust may form explosive mixtures with air. (ERG, 2024)
Health Hazard
Excerpt from ERG Guide 149 [Substances (Self-Reactive)]:

Inhalation or contact with vapors, substance or decomposition products may cause severe injury or death. May produce irritating, toxic and/or corrosive gases. Runoff from fire control or dilution water may cause environmental contamination. (ERG, 2024)
Reactivity Profile
AZODICARBONAMIDE is easily ignited and burns rapidly. Confined samples show a high rate of pressure rise during thermal decomposition, which produces carbon monoxide and nitrogen. Sensitive to temperatures exceeding 122°F. May be sensitive to exposure to light. Stable in bulk when stored for two weeks at temperatures up to 140°F. Slightly unstable in water suspension (showed 1.3% decomposition at 2 mg/mL over a two-week period at room temperature in the light but no decomposition at 41°F over a two-week period in the dark (NTP, 1992). Reacts with hot water to give nitrogen, carbon monoxide, and ammonia [Hawley]. Decomposes in hot hydrochloric acid. Incompatible with strong acids and bases, and with compounds of metals.
Belongs to the Following Reactive Group(s)
Potentially Incompatible Absorbents

No information available.

The Response Recommendation fields include isolation and evacuation distances, as well as recommendations for firefighting, non-fire response, protective clothing, and first aid. The information in CAMEO Chemicals comes from a variety of data sources.
Isolation and Evacuation
Excerpt from ERG Guide 149 [Substances (Self-Reactive)]:

IMMEDIATE PRECAUTIONARY MEASURE: Isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids.

LARGE SPILL: Consider initial evacuation for at least 250 meters (800 feet) in all directions.

FIRE: If tank, rail tank car or highway tank is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2024)
Firefighting
Excerpt from ERG Guide 149 [Substances (Self-Reactive)]:

SMALL FIRE: Dry chemical, CO2, water spray or regular foam.

LARGE FIRE: Flood fire area with water from a distance. If it can be done safely, move undamaged containers away from the area around the fire.

FIRE INVOLVING TANKS, RAIL TANK CARS OR HIGHWAY TANKS: BEWARE OF POSSIBLE CONTAINER EXPLOSION. Fight fire from maximum distance or use unmanned master stream devices or monitor nozzles. Cool containers with flooding quantities of water until well after fire is out. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. ALWAYS stay away from tanks in direct contact with flames. (ERG, 2024)
Non-Fire Response
Excerpt from ERG Guide 149 [Substances (Self-Reactive)]:

ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area. Do not touch or walk through spilled material. Stop leak if you can do it without risk.

SMALL SPILL: Pick up with inert, damp, non-combustible material using clean, non-sparking tools and place into loosely covered plastic containers for later disposal. Prevent entry into waterways, sewers, basements or confined areas. (ERG, 2024)
Protective Clothing
Excerpt from ERG Guide 149 [Substances (Self-Reactive)]:

Wear positive pressure self-contained breathing apparatus (SCBA). Wear chemical protective clothing that is specifically recommended by the manufacturer when there is NO RISK OF FIRE. Structural firefighters' protective clothing provides thermal protection but only limited chemical protection. (ERG, 2024)
DuPont Tychem® Suit Fabrics
No information available.
First Aid
EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.

SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.

INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing.

INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)

The Physical Property fields include properties such as vapor pressure and boiling point, as well as explosive limits and toxic exposure thresholds The information in CAMEO Chemicals comes from a variety of data sources.

Note: For Vapor Density and Specific Gravity, comparing the value to 1.0 can tell you if the chemical will likely sink/rise in air or sink/float in fresh water (respectively). Short phrases have been added to those values below as an aid. However, make sure to also consider the circumstances of a release. The Vapor Density comparisons are only valid when the gas escaping is at the same temperature as the surrounding air itself. If the chemical is escaping from a container where it was pressurized or refrigerated, it may first escape and behave as a heavy gas and sink in the air (even if it has a Vapor Density value less than 1). Also, the Specific Gravity comparisons are for fresh water (density 1.0 g/mL). If your spill is in salt water (density about 1.027 g/mL), you need to adjust the point of comparison. There are some chemicals that will sink in fresh water and float in salt water.
Chemical Formula:
  • C2H4N4O2
Flash Point: 205°F (NTP, 1992)
Lower Explosive Limit (LEL): data unavailable
Upper Explosive Limit (UEL): data unavailable
Autoignition Temperature: data unavailable
Melting Point: 437°F (decomposes) (NTP, 1992)
Vapor Pressure: 7.1 mmHg at 66.2°F ; 10.7 mmHg at 79.7°F (NTP, 1992)
Vapor Density (Relative to Air): data unavailable
Specific Gravity: 1.65 at 68°F (NTP, 1992) - Denser than water; will sink
Boiling Point: Decomposes (NTP, 1992)
Molecular Weight: 116.08 (NTP, 1992)
Water Solubility: less than 0.1 mg/mL at 70°F (NTP, 1992)
Ionization Energy/Potential: data unavailable
IDLH: data unavailable

AEGLs (Acute Exposure Guideline Levels)

No AEGL information available.

ERPGs (Emergency Response Planning Guidelines)

No ERPG information available.

PACs (Protective Action Criteria)

Chemical PAC-1 PAC-2 PAC-3
Azodicarbamide; (Azodicarbonamide) (123-77-3) 2.6 mg/m3 29 mg/m3 170 mg/m3
(DOE, 2024)

The Regulatory Information fields include information from the U.S. Environmental Protection Agency's Title III Consolidated List of Lists, the U.S. Cybersecurity and Infrastructure Security Agency's Chemical Facility Anti-Terrorism Standards, and the U.S. Occupational Safety and Health Administration's Process Safety Management of Highly Hazardous Chemicals Standard List (see more about these data sources).

EPA Consolidated List of Lists

No regulatory information available.

CISA Chemical Facility Anti-Terrorism Standards (CFATS)

No regulatory information available.

OSHA Process Safety Management (PSM) Standard List

No regulatory information available.

This section provides a listing of alternate names for this chemical, including trade names and synonyms.
  • AA 110S
  • ABFA
  • AC 1
  • AC 1C
  • AC 1L
  • AC 3
  • ADC
  • ADCA
  • ADK STAB OF 14
  • AW 9
  • AZ 605
  • AZ-H
  • AZ-HM
  • AZM 2S
  • AZOBIS 50C
  • AZOBIS CA
  • AZOBIS CA 110B
  • AZOBIS CA 51C
  • 1,1'-AZOBISCARBAMIDE
  • AZOBISCARBONAMIDE
  • AZOBISCARBOXAMIDE
  • 1,1'-AZOBISFORMAMIDE
  • 1,1'-AZOBIS[FORMAMIDE]
  • AZOBUL
  • AZOCEL
  • AZODICARBAMIDE
  • AZODICARBOAMIDE
  • AZODICARBONAMIDE
  • AZODICARBOXAMIDE
  • AZODICARBOXYLIC ACID DIAMIDE
  • AZODIFORMAMIDE
  • 1,1'-AZODIFORMAMIDE
  • AZOFORM A
  • AZOFORMAMIDE
  • AZOPLASTONE
  • CELLMIC 223
  • CELLMIC C
  • CELLMIC C 121
  • CELLMIC C 191
  • CELLMIC C 2
  • CELLMIC C 217
  • CELLMIC C 22
  • CELLMIC CAP
  • CELLMIC CAP 500
  • CELLMIC CE
  • CELLMIC MB 1031A
  • CELLMIC MB 3013
  • CELOGEN AZ
  • CELOGEN AZ 130
  • CELOGEN AZ 199
  • CELOSEN AZ
  • CHKHZ 21
  • CHKHZ 21R
  • DELTA(1,1')-BIUREA
  • DELTA1,1'-BIUREA
  • DIAZENEDICARBOXAMIDE
  • DIAZENEDICARBOXYLIC ACID DIAMIDE
  • DP 18/47
  • DP 45/1
  • EKUSERA S 10
  • EVIPOR
  • FASCOM AZ 4ED
  • FE 788
  • FICEL AC
  • FICEL EP-A
  • FORMAMIDE, 1,1'-AZOBIS-
  • GENITRON AC
  • GENITRON AC 2
  • GENITRON AC 3
  • GENITRON AC 4
  • GENITRON ACSP 4
  • GENITRON EPC
  • KEMPORE
  • KEMPORE 125
  • KEMPORE 200
  • KEMPORE 60/40
  • KEMPORE R 125
  • LUCEL ADA
  • NCI-C55981
  • NITROPORE
  • NORTECH MF 1062FA
  • PARAMID K 1
  • PINHOLE ACR 3
  • PINHOLE AK 2
  • PORAMID K 1
  • POROFOR 505
  • POROFOR ADC
  • POROFOR ADC/R
  • POROFOR CHKHZ 21
  • POROFOR CHKHZ 21R
  • POROFOR KA 9149
  • POROFORE 505
  • RHENOGRAN ADC/K 50
  • S 643
  • SO 20
  • UNICELL D 200
  • UNIFOAM AZ
  • UNIFOAM AZ 40
  • UNIFOAM AZ-L
  • UNIFOAM AZH
  • UNIFOAM AZH 25
  • UNIFOAM AZH-M
  • UNIFOAM AZM
  • UNIFOAM AZS
  • UNIFOAM SOL
  • UNIFOAM Z
  • UNIFORM AZ
  • VINIFOR AC 3A
  • VINIFOR AC-T
  • VINYFOR AC 1
  • VINYFOR AC 1C
  • VINYFOR AC 3
  • VINYFOR AC 3C
  • VINYFOR AC 3M
  • VINYFOR AC 50S
  • VINYFOR AC-LQ
  • VINYFOR AW 9
  • VINYFOR DW 6
  • VINYFOR SE 30
  • VINYFOR SW 7
  • VINYFOR SW 9
  • VINYLOL AC
  • YUNIHOMU AZ

Contact Us | Website Satisfaction Surveyexternal_link

Version 3.1.0 rev 1