DISPERSE BLUE 7
![](javascript:dropDownText("section1_info","section1_info_marker","/static/images/up_arrow.png","/static/images/down_arrow.png")){kind=icon}
![](javascript:dropDownText("sec1_help","sec1_help_marker","/static/images/dropdown_opened.gif","/static/images/dropdown_closed.gif"))
The
Chemical Identifier fields
include common identification numbers, the
NFPA diamond
U.S. Department of Transportation hazard labels, and a general
description of the chemical. The information in CAMEO Chemicals comes
from a variety of
data sources.
| CAS Number | UN/NA Number |
|---|---|
|
none |
| DOT Hazard Label | USCG CHRIS Code |
| data unavailable | none |
| NIOSH Pocket Guide | International Chem Safety Card |
| none | none |
NFPA 704
data unavailable
General Description
PHYSICAL DESCRIPTION: Fine black powder. (NTP, 1992)
![](javascript:dropDownText("section2_info","section2_info_marker","/static/images/up_arrow.png","/static/images/down_arrow.png")){kind=icon}
![](javascript:dropDownText("sec2_help","sec2_help_marker","/static/images/dropdown_opened.gif","/static/images/dropdown_closed.gif"))
The
Hazard fields
include
special hazard alerts
air and water
reactions, fire hazards, health hazards, a reactivity profile, and
details about
reactive groups assignments
and
potentially incompatible absorbents.
The information in CAMEO Chemicals comes from a variety of
data sources.
Reactivity Alerts
none
Air & Water Reactions
Water soluble.
Fire Hazard
Flash point data for this chemical are not available; however it is probably combustible. (NTP, 1992)
Health Hazard
No information available.
Reactivity Profile
An amine. Amines are chemical bases. They neutralize acids to form salts plus water. These acid-base reactions are exothermic. The amount of heat that is evolved per mole of amine in a neutralization is largely independent of the strength of the amine as a base. Amines may be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen is generated by amines in combination with strong reducing agents, such as hydrides.
Belongs to the Following Reactive Group(s)
Potentially Incompatible Absorbents
Use caution: Liquids with this reactive group classification have been known to react with the absorbent listed below. More info about absorbents, including situations to watch out for...
- Mineral-Based & Clay-Based Absorbents
![](javascript:dropDownText("section3_info","section3_info_marker","/static/images/up_arrow.png","/static/images/down_arrow.png")){kind=icon}
![](javascript:dropDownText("sec3_help","sec3_help_marker","/static/images/dropdown_opened.gif","/static/images/dropdown_closed.gif"))
The
Response Recommendation fields
include isolation and evacuation distances, as well as recommendations for
firefighting, non-fire response, protective clothing, and first aid. The
information in CAMEO Chemicals comes from a variety of
data sources.
Isolation and Evacuation
No information available.
Firefighting
Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)
Non-Fire Response
SMALL SPILLS AND LEAKAGE: If you spill this chemical, you should dampen the solid spill material with water, then transfer the dampened material to a suitable container. Use absorbent paper dampened with water to pick up any remaining material. Seal your contaminated clothing and the absorbent paper in a vapor-tight plastic bag for eventual disposal. Wash all contaminated surfaces with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned.
STORAGE PRECAUTIONS: You should store this material under ambient temperatures. (NTP, 1992)
STORAGE PRECAUTIONS: You should store this material under ambient temperatures. (NTP, 1992)
Protective Clothing
RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. (NTP, 1992)
DuPont Tychem® Suit Fabrics
No information available.
First Aid
EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.
SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.
INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing.
INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)
SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.
INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing.
INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)
![](javascript:dropDownText("section4_info","section4_info_marker","/static/images/up_arrow.png","/static/images/down_arrow.png")){kind=icon}
![](javascript:dropDownText("sec4_help","sec4_help_marker","/static/images/dropdown_opened.gif","/static/images/dropdown_closed.gif"))
The
Physical Property fields
include properties such as vapor pressure and
boiling point, as well as explosive limits and
toxic exposure thresholds
The information in CAMEO Chemicals comes from a variety of
data sources.
Note: For Vapor Density and Specific Gravity, comparing the value to 1.0 can tell you if the chemical will likely sink/rise in air or sink/float in fresh water (respectively). Short phrases have been added to those values below as an aid. However, make sure to also consider the circumstances of a release. The Vapor Density comparisons are only valid when the gas escaping is at the same temperature as the surrounding air itself. If the chemical is escaping from a container where it was pressurized or refrigerated, it may first escape and behave as a heavy gas and sink in the air (even if it has a Vapor Density value less than 1). Also, the Specific Gravity comparisons are for fresh water (density 1.0 g/mL). If your spill is in salt water (density about 1.027 g/mL), you need to adjust the point of comparison. There are some chemicals that will sink in fresh water and float in salt water.
Note: For Vapor Density and Specific Gravity, comparing the value to 1.0 can tell you if the chemical will likely sink/rise in air or sink/float in fresh water (respectively). Short phrases have been added to those values below as an aid. However, make sure to also consider the circumstances of a release. The Vapor Density comparisons are only valid when the gas escaping is at the same temperature as the surrounding air itself. If the chemical is escaping from a container where it was pressurized or refrigerated, it may first escape and behave as a heavy gas and sink in the air (even if it has a Vapor Density value less than 1). Also, the Specific Gravity comparisons are for fresh water (density 1.0 g/mL). If your spill is in salt water (density about 1.027 g/mL), you need to adjust the point of comparison. There are some chemicals that will sink in fresh water and float in salt water.
| Chemical Formula: |
|
Flash Point: data unavailable
Lower Explosive Limit (LEL): data unavailable
Upper Explosive Limit (UEL): data unavailable
Autoignition Temperature: data unavailable
Melting Point:
greater than 572°F
(NTP, 1992)
Vapor Pressure: data unavailable
Vapor Density (Relative to Air): data unavailable
Specific Gravity: data unavailable
Boiling Point: data unavailable
Molecular Weight:
358.38
(NTP, 1992)
Water Solubility:
50 to 100 mg/mL
at 70°F
(NTP, 1992)
Ionization Energy/Potential: data unavailable
IDLH: data unavailable
AEGLs (Acute Exposure Guideline Levels)
No AEGL information available.ERPGs (Emergency Response Planning Guidelines)
No ERPG information available.PACs (Protective Action Criteria)
No PAC information available.![](javascript:dropDownText("section5_info","section5_info_marker","/static/images/up_arrow.png","/static/images/down_arrow.png")){kind=icon}
![](javascript:dropDownText("sec5_help","sec5_help_marker","/static/images/dropdown_opened.gif","/static/images/dropdown_closed.gif"))
The
Regulatory Information fields
include information from
the U.S. Environmental Protection Agency's Title III Consolidated List of
Lists,
the U.S. Cybersecurity and Infrastructure Security Agency's Chemical Facility
Anti-Terrorism Standards,
and the U.S. Occupational Safety and Health Administration's
Process Safety Management of Highly Hazardous Chemicals Standard List
(see more about these
data sources).
EPA Consolidated List of Lists
No regulatory information available.CISA Chemical Facility Anti-Terrorism Standards (CFATS)
No regulatory information available.OSHA Process Safety Management (PSM) Standard List
No regulatory information available.![](javascript:dropDownText("section6_info","section6_info_marker","/static/images/up_arrow.png","/static/images/down_arrow.png")){kind=icon}
![](javascript:dropDownText("sec6_help","sec6_help_marker","/static/images/dropdown_opened.gif","/static/images/dropdown_closed.gif"))
This section provides a listing of alternate names for this chemical,
including trade names and synonyms.
- ACETATE TURQUOISE BLUE B
- ACETOQUINONE LIGHT GREEN BLUE JL
- AMACEL GREEN BLUE B
- AMACEL GREEN BLUE G
- ANTHRAQUINONE, 1,4-DIHYDROXY-5,8-BIS[(2-HYDROXYETHYL)AMINO]-
- ARTISIL BLUE GREEN GP
- 1,4-BIS((2-HYDROXYETHYL)AMINO)-5,8-DIHYDROXYANTHRAQUINONE
- 1,4-BIS(BETA-HYDROXYETHYLAMINO)-5,8-DIHYDROXYANTHRAQUINONE
- 1,4-BIS[(2-HYDROXYETHYL)AMINO]-5,8-DIHYDROXYANTHRAQUINONE
- C.I. 62500
- C.I. DISPERSE BLUE 7
- C.I. SOLVENT BLUE 69
- CELANTHRENE FAST BLUE 2G
- CELLITON BLUE GREEN B
- CELLITON FAST BLUE GREEN B
- CELLITON FAST BLUE GREEN BA-CF
- CELUTATE GREEN BLUE BGH
- CIBACET BLUE GREEN C
- CIBACET BLUE GREEN CB
- CIBACET TURQUOISE BLUE 2G
- CIBACET TURQUOISE BLUE 4G
- CIBACET TURQUOISE BLUE G
- CILLA FAST BLUE GREEN B
- DIACELLITON FAST BLUE GREEN B
- 1,4-DIETHANOLAMINO-5,8-DIHYDROXYANTHRAQUINONE
- 5,8-DIHYDROXY-1,4-BIS((2-HYDROXYETHYL)AMINO)ANTHRAQUINONE
- 5,8-DIHYDROXY-1,4-BIS[(2-HYDROXYETHYL)AMINO]ANTHRAQUINONE
- 5,8-DIHYDROXY-1,4-DIHYDROXYETHYLAMINOANTHRAQUINONE
- 1,4-DIHYDROXY-5,8-BIS((2-HYDROXYETHYL)AMINO)-9,10-ANTHRACENEDIONE
- 1,4-DIHYDROXY-5,8-BIS((2-HYDROXYETHYL)AMINO)ANTHRAQUINONE
- 1,4-DIHYDROXY-5,8-BIS[(2-HYDROXYETHYL)AMINO]ANTHRAQUINONE
- DISPERSE BLUE 7
- DISPERSE BLUE GREEN
- DISPERSIVE BLUE-GREEN
- DISPERSOL BLUE 7G
- DURANOL BLUE GREEN B
- DURANOL PRINTING BLUE GREEN B
- ESTEROQUINONE LIGHT BLUE 4JL
- FENACET FAST TURQUOISE B
- INTERCHEM ACETATE GREEN BLUE ALF
- INTERCHEM DISPERSE GREEN BLUE ALFH
- INTERCHEM HISPERSE GREEN BLUE ALFH
- MIKETON FAST TURQUOISE BLUE G
- NACELAN BLUE CBG
- NYLOQUINONE BLUE 4J
- PALANIL BLUE 7G
- PERLITON BLUE GREEN B
- SAMARON BLUE 5G
- SERIPLAS BLUE GREEN BW
- SERIPLAS GLUE GREEN BW
- SERISOL FAST BLUE GREEN B
- SERISOL FAST BLUE GREEN BW
- SETACYL BLUE 6GN
- SETACYL BLUE GREEN P-BS
- SETACYL TURQUOISE BLUE 2G
- SETACYL TURQUOISE BLUE 4G
- SETACYL TURQUOISE BLUE G
- SETACYL TURQUOISE BLUE GD
- SUPRACET BLUE GREEN B
- SUPRACET FAST GREEN BLUE B
- TERASIL BLUE GREEN CB
- TERASIL TURQUOISE BLUE G
Version 3.0.0