DODECYL ALCOHOL ETHOXYLATE
![](javascript:dropDownText("section1_info","section1_info_marker","/static/images/up_arrow.png","/static/images/down_arrow.png")){kind=icon}
![](javascript:dropDownText("sec1_help","sec1_help_marker","/static/images/dropdown_opened.gif","/static/images/dropdown_closed.gif"))
The
Chemical Identifier fields
include common identification numbers, the
NFPA diamond
U.S. Department of Transportation hazard labels, and a general
description of the chemical. The information in CAMEO Chemicals comes
from a variety of
data sources.
| CAS Number | UN/NA Number |
|---|---|
|
none |
| DOT Hazard Label | USCG CHRIS Code |
| data unavailable | none |
| NIOSH Pocket Guide | International Chem Safety Card |
| none | none |
NFPA 704
| Diamond | Hazard | Value | Description | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Health
|
0 | No hazard beyond that of ordinary combustible material. | |||||||||
Flammability
|
1 | Must be preheated before ignition can occur. | ||||||||||
Instability
|
0 | Normally stable, even under fire conditions. | ||||||||||
Special
|
(NFPA, 2010)
General Description
PHYSICAL DESCRIPTION: Clear colorless to light yellow viscous liquid. Colorless at 266°F; brown at 644°F. Bland odor. (NTP, 1992)
![](javascript:dropDownText("section2_info","section2_info_marker","/static/images/up_arrow.png","/static/images/down_arrow.png")){kind=icon}
![](javascript:dropDownText("sec2_help","sec2_help_marker","/static/images/dropdown_opened.gif","/static/images/dropdown_closed.gif"))
The
Hazard fields
include
special hazard alerts
air and water
reactions, fire hazards, health hazards, a reactivity profile, and
details about
reactive groups assignments
and
potentially incompatible absorbents.
The information in CAMEO Chemicals comes from a variety of
data sources.
Reactivity Alerts
none
Air & Water Reactions
Water soluble.
Fire Hazard
This chemical is combustible. (NTP, 1992)
Health Hazard
SYMPTOMS: This compound may cause irritation of the skin, eyes and respiratory tract. Prolonged eye contact may cause severe irritation. Ingestion causes gastric disturbances. High doses may cause narcosis and convulsions.
ACUTE/CHRONIC HAZARDS: This compound may be harmful by ingestion, inhalation or skin absorption. It is an irritant of the skin, eyes and respiratory tract. When heated to decomposition it emits acrid smoke, irritating fumes and toxic fumes of carbon monoxide and carbon dioxide. (NTP, 1992)
ACUTE/CHRONIC HAZARDS: This compound may be harmful by ingestion, inhalation or skin absorption. It is an irritant of the skin, eyes and respiratory tract. When heated to decomposition it emits acrid smoke, irritating fumes and toxic fumes of carbon monoxide and carbon dioxide. (NTP, 1992)
Reactivity Profile
DODECYL ALCOHOL ETHOXYLATE is incompatible with strong oxidizing agents and strong bases. (NTP, 1992)
Belongs to the Following Reactive Group(s)
Potentially Incompatible Absorbents
Use caution: Liquids with this reactive group classification have been known to react with the absorbent listed below. More info about absorbents, including situations to watch out for...
- Cellulose-Based Absorbents
![](javascript:dropDownText("section3_info","section3_info_marker","/static/images/up_arrow.png","/static/images/down_arrow.png")){kind=icon}
![](javascript:dropDownText("sec3_help","sec3_help_marker","/static/images/dropdown_opened.gif","/static/images/dropdown_closed.gif"))
The
Response Recommendation fields
include isolation and evacuation distances, as well as recommendations for
firefighting, non-fire response, protective clothing, and first aid. The
information in CAMEO Chemicals comes from a variety of
data sources.
Isolation and Evacuation
No information available.
Firefighting
Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. A water spray may also be used. (NTP, 1992)
Non-Fire Response
SMALL SPILLS AND LEAKAGE: If you spill this chemical, use absorbent paper to pick up all liquid spill material. Seal the absorbent paper, as well as any of your clothing which may be contaminated, in a vapor tight plastic bag for eventual disposal. Wash any surfaces you may have contaminated with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned.
STORAGE PRECAUTIONS: You should store this chemical under ambient temperatures, and keep it away from oxidizing materials. (NTP, 1992)
STORAGE PRECAUTIONS: You should store this chemical under ambient temperatures, and keep it away from oxidizing materials. (NTP, 1992)
Protective Clothing
RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. Splash proof safety goggles should be worn while handling this chemical. Alternatively, a full face respirator, equipped as above, may be used to provide simultaneous eye and respiratory protection. (NTP, 1992)
DuPont Tychem® Suit Fabrics
No information available.
First Aid
EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.
SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.
INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing.
INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)
SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.
INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing.
INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)
![](javascript:dropDownText("section4_info","section4_info_marker","/static/images/up_arrow.png","/static/images/down_arrow.png")){kind=icon}
![](javascript:dropDownText("sec4_help","sec4_help_marker","/static/images/dropdown_opened.gif","/static/images/dropdown_closed.gif"))
The
Physical Property fields
include properties such as vapor pressure and
boiling point, as well as explosive limits and
toxic exposure thresholds
The information in CAMEO Chemicals comes from a variety of
data sources.
Note: For Vapor Density and Specific Gravity, comparing the value to 1.0 can tell you if the chemical will likely sink/rise in air or sink/float in fresh water (respectively). Short phrases have been added to those values below as an aid. However, make sure to also consider the circumstances of a release. The Vapor Density comparisons are only valid when the gas escaping is at the same temperature as the surrounding air itself. If the chemical is escaping from a container where it was pressurized or refrigerated, it may first escape and behave as a heavy gas and sink in the air (even if it has a Vapor Density value less than 1). Also, the Specific Gravity comparisons are for fresh water (density 1.0 g/mL). If your spill is in salt water (density about 1.027 g/mL), you need to adjust the point of comparison. There are some chemicals that will sink in fresh water and float in salt water.
Note: For Vapor Density and Specific Gravity, comparing the value to 1.0 can tell you if the chemical will likely sink/rise in air or sink/float in fresh water (respectively). Short phrases have been added to those values below as an aid. However, make sure to also consider the circumstances of a release. The Vapor Density comparisons are only valid when the gas escaping is at the same temperature as the surrounding air itself. If the chemical is escaping from a container where it was pressurized or refrigerated, it may first escape and behave as a heavy gas and sink in the air (even if it has a Vapor Density value less than 1). Also, the Specific Gravity comparisons are for fresh water (density 1.0 g/mL). If your spill is in salt water (density about 1.027 g/mL), you need to adjust the point of comparison. There are some chemicals that will sink in fresh water and float in salt water.
| Chemical Formula: |
|
Flash Point:
347°F
(NTP, 1992)
Lower Explosive Limit (LEL): data unavailable
Upper Explosive Limit (UEL): data unavailable
Autoignition Temperature: data unavailable
Melting Point:
41 to 70°F
(NTP, 1992)
Vapor Pressure:
16.7 mmHg
at 73.4°F
; 44.0 mmHg at 104°F
(NTP, 1992)
Vapor Density (Relative to Air): data unavailable
Specific Gravity:
0.9974
at 75°F
(NTP, 1992)
- Less dense than water; will float
Boiling Point:
Endotherm at 220-223°F
(NTP, 1992)
Molecular Weight:
1199.57
(NTP, 1992)
Water Solubility:
greater than or equal to 100 mg/mL
at 68°F
(NTP, 1992)
Ionization Energy/Potential: data unavailable
IDLH: data unavailable
AEGLs (Acute Exposure Guideline Levels)
No AEGL information available.ERPGs (Emergency Response Planning Guidelines)
No ERPG information available.PACs (Protective Action Criteria)
| Chemical | PAC-1 | PAC-2 | PAC-3 |
|---|---|---|---|
| Brij-35; (alpha-Dodecyl-omega-hydroxypoly(oxyethylene)) (9002-92-0) | 2.9 mg/m3 | 31 mg/m3 | 200 mg/m3 |
(DOE, 2018)
![](javascript:dropDownText("section5_info","section5_info_marker","/static/images/up_arrow.png","/static/images/down_arrow.png")){kind=icon}
![](javascript:dropDownText("sec5_help","sec5_help_marker","/static/images/dropdown_opened.gif","/static/images/dropdown_closed.gif"))
The
Regulatory Information fields
include information from
the U.S. Environmental Protection Agency's Title III Consolidated List of
Lists,
the U.S. Cybersecurity and Infrastructure Security Agency's Chemical Facility
Anti-Terrorism Standards,
and the U.S. Occupational Safety and Health Administration's
Process Safety Management of Highly Hazardous Chemicals Standard List
(see more about these
data sources).
EPA Consolidated List of Lists
No regulatory information available.CISA Chemical Facility Anti-Terrorism Standards (CFATS)
No regulatory information available.OSHA Process Safety Management (PSM) Standard List
No regulatory information available.![](javascript:dropDownText("section6_info","section6_info_marker","/static/images/up_arrow.png","/static/images/down_arrow.png")){kind=icon}
![](javascript:dropDownText("sec6_help","sec6_help_marker","/static/images/dropdown_opened.gif","/static/images/dropdown_closed.gif"))
This section provides a listing of alternate names for this chemical,
including trade names and synonyms.
- ACTINOL L 3
- ACTINOL L 7
- ADEKA CARPOL M 2
- ADEKA CARPOL MBF 100
- ADEKATOL LA 1275
- AETHOXYSKLEROL
- AKYPOROX RLM 160
- AKYPOROX RLM 230
- ALDOSPERSE L 9
- ALKASURF LAN 1
- ALKASURF LAN 3
- ALPHA-DOCECYL-OMEGA-HYDROXY-POLYOXYETHYLENE
- ALPHA-DODECYL-OMEGA-HYDROXYPOLY(OXY-1,2-ETHANEDIYL)
- ALPHA-DODECYL-OMEGA-HYDROXYPOLY(OXYETHYLENE)
- ATLAS G 2133
- ATLAS G 3705
- ATLAS G 3707
- ATLAS G-2133
- ATLAS G-3705
- BASE LP 12
- BL 9
- BL 9 (POLYGLYCOL)
- BL 9EX
- BRIJ 23
- BRIJ 30
- BRIJ 30ICI
- BRIJ 30SP
- BRIJ 35
- BRIJ 35L
- BRIJ 36T
- CALGENE 40L
- CARSONOL L 2
- CARSONOL L 3
- CHEMAL LA 23
- CHIMIPAL AE 3
- CIMAGEL
- D 10
- D 10 (GERMAN SURFACTANT)
- DEHYDROL LS 4
- DEPEG
- DO 9
- DOBANOX 23E
- DODECANOL, ETHOXYLATE
- DODECANOL, POLYETHOXYLATED
- DODECANOL-ETHYLENE OXIDE (9.5 MOLES) CONDENSATE
- DODECYL ALCOHOL ETHOXYLATE
- DODECYL ALCOHOL, ETHOXYLATED
- DODECYL ALCOHOL, MONOETHER WITH POLYETHYLENE GLYCOL
- DODECYL POLY(OXYETHYLENE) ETHER
- DODECYL POLY(OXYETHYLENE)ETHER
- DU PONT WK
- EM 150
- EM 150 (POLYETHER)
- EM 750
- EMAL 108
- EMALEX 705
- EMALEX 707
- EMALEX 709
- EMALEX 710
- EMALEX 712
- EMALEX 715
- EMALEX 720
- EMALEX 730
- EMALEX 750
- EMULGEN 100
- EMULGEN 103
- EMULGEN 104P
- EMULGEN 105
- EMULGEN 106
- EMULGEN 108
- EMULGEN 109
- EMULGEN 109P
- EMULGEN 120
- EMULGEN 123P
- EMULGEN 130K
- EMULGEN 147
- EMULGEN 150
- EMULGEN 504K
- EMULMIN 60
- EMULMIN L 380
- EMULMIN L 500
- EMULMIN NL 100
- EMULMIN NL 70
- EMULMIN NL 90
- ET 170
- ETHAL LA 50
- ETHAL LA-X
- ETHOSPERSE LA 12
- ETHOSPERSE LA 23
- ETHOSPERSE LA 4
- ETHOSPERSE LA-4
- ETHOXYLATED DODECYLALCOHOL
- ETHOXYLATED LAURYL ALCOHOL
- ETHYLENE OXIDE HOMOPOLYMER MONODODECYL-TERMINATED
- ETHYLENE OXIDE-LAURYL ALCOHOL ADDUCT
- ETHYLENE OXIDE-LAURYL ALCOHOL POLYCONDENSATE
- G 2130A
- G 3707
- G 3711
- G-2130A
- GLYCOLS, POLYETHYLENE, MONODODECYL ETHER
- HETOXOL L 4
- HYDROXYPOLYETHOXYDODECANE
- IMBENTIN AG 120/90
- IMBENTIN E 120/100
- 40L (POLYETHER)
- L 12-8
- 40L
- LA
- LA (ALCOHOL)
- LA 7
- LA 7 (POLYMER)
- LAG-S
- LANETTES
- LAURETH
- LAURETH 12
- LAURETH 15
- LAURETH 2
- LAURETH 23
- LAURETH 4
- LAURETH 9
- LAUROMACROGOL
- LAUROMACROGOL 400
- LAURYL ALCOHOL ETHOXYLATE
- LAURYL ALCOHOL, ETHOXYLATED
- LAURYL ALCOHOL-ETHYLENE OXIDE ADDUCT
- LAURYL POLY(OXYETHYLENE) ETHER
- LAURYL POLYETHYLENE GLYCOL ETHER
- LEO 10
- LIPAL 4LA
- LIPOCOL L 12
- LIPOCOL L 4
- LIPOCOL L-23
- LIPOCOL L-4
- LIPONOX KCI
- LUBROL 12A9
- LUBROL PX
- MACOL LA 12
- MACOL LA 4
- MARLIPAL 1217
- MARLIPAL 124
- MARLIPAL MG
- MERGITAL LM 11
- NCI-C54875
- NEMOL C 24
- NEMOL C 28
- NEMOL C 822
- NEWCOL 1100
- NEWCOL 1102
- NEWCOL 1103
- NEWCOL 1110
- NEWCOL 1120
- NEWCOL 1203
- NIKKOL BL
- NIKKOL BL 2
- NIKKOL BL 21
- NIKKOL BL 25
- NIKKOL BL 4.2
- NIKKOL BL 42
- NIKKOL BL 4SY
- NIKKOL BL 5SY
- NIKKOL BL 8SY
- NIKKOL BL 9EX
- NISSAN NONION K
- NISSAN NONION K 204
- NISSAN NONION K 220
- NL 140
- NOIGEN 160
- NOIGEN 170
- NOIGEN ET 102
- NOIGEN ET 140E
- NOIGEN ET 143
- NOIGEN ET 143L
- NOIGEN ET 160
- NOIGEN ET 170
- NOIGEN ET 190
- NOIGEN ET 200E
- NOIGEN ET 83
- NOIGEN P
- NOIGEN YX 400
- NOIGEN YX 500
- NONIDET 12008
- NONILITE AL 20
- NONIO-LIGHT AL 20
- NONION K 204
- NONION K 220
- OXANOL L 3
- OXETAL C 114
- OXYETHYLENATED DODECYL ALCOHOL
- PEG DODECYL ETHER
- PEG N-DODECYL ETHER
- PEGNOL L 12
- PEGNOL L 20
- PEGNOL L 6
- PEREGAL O 20
- PIONIN A 44PM
- PLURAFAC RA 43
- PO 23LE
- POLIDOCANOL
- POLY(ETHYLENE OXIDE) DODECYL ETHER
- POLY(ETHYLENE OXIDE) MONOLAURYL ETHER
- POLY(OXY-1,2-ETHANEDIYL), ALPHA-DODECYL-OMEGA-HYDROXY-
- POLY(OXYETHYLENE) DODECYL ETHER
- POLY(OXYETHYLENE) LAURYL ETHER
- POLY(OXYETHYLENE) MONODODECYL ETHER
- POLY(OXYETHYLENE) MONOLAURYL ETHER
- POLYDOCANOL
- POLYETHOXYLATED DODECANOL
- POLYETHYLENE GLYCOL DODECYL ETHER
- POLYETHYLENE GLYCOL DODECYL MONOETHER
- POLYETHYLENE GLYCOL LAURYL ALCOHOL ETHER
- POLYETHYLENE GLYCOL LAURYL ETHER
- POLYETHYLENE GLYCOL MONODODECYL ETHER
- POLYETHYLENE GLYCOL MONOLAURYL ETHER
- POLYETHYLENE OXIDE LAURYL ETHER
- POLYOXY 23 LAURYL ETHER
- POLYOXYETHYLENE DODECYL ALCOHOL ETHER
- POLYOXYETHYLENE LAURIC ALCOHOL
- POLYOXYETHYLENE LAURYL ALCOHOL
- POLYOXYETHYLENE LAURYL ALCOHOL ETHER
- PROCOL LA 20
- PURATEN 80
- REMCOPAL 20
- REWOPAL LA 6
- RHODASURF L 4
- RHODASURF L 790
- ROKANOL DB
- ROKANOL L
- ROKANOL L 10
- ROKANOL L 10/80
- ROKANOL L 2
- ROKANOL L 25
- ROKANOL L 3
- ROKANOL L 4
- ROKANOL L 6
- ROKANOL LK
- ROMOPAL LN
- SIMULOL 330 M
- SIMULOL 330M
- SIMULSOL P 23
- SIMULSOL P 4
- SIPOL LAL 21
- SIPONIC L
- SIPONIC L 10
- SIPONIC L 12
- SIPONIC L 15
- SIPONIC L 150
- SIPONIC L 3
- SIPONIC L 4
- SIPONIC L 7-90
- SIPONIC L-4
- SLOVASOL S
- SLOVASOL SF
- STANDAMUL LA 2
- SURFACTANT WK
- TERIC 12A
- TEXOFOR B 30
- TEXOFOR B 9
- THESAT
- THESIT
- TRYCOL 5882
- TRYCOL 5954
- TRYCOL 5963
- TRYCOL 5964
- TRYCOL 5967
- TRYCOL LAL 12
- TRYCOL LAL 23
- TRYCOL LAL 4
- TRYCOL LAL 8
- TRYCOL LAL SERIES
- VALUE 2205
- YX 500
Version 3.0.0