Get the app in the App Store and on Google Play!

2,2'-DICHLORODIETHYL ETHER

6.1 - Poison 3 - Flammable liquid
Add to MyChemicals

The Chemical Identifier fields include common identification numbers, the NFPA diamond U.S. Department of Transportation hazard labels, and a general description of the chemical. The information in CAMEO Chemicals comes from a variety of data sources.
CAS Number UN/NA Number
  • 111-44-4   (2,2'-DICHLORODIETHYL ETHER)
DOT Hazard Label USCG CHRIS Code
  • Poison
  • Flammable Liquid
NIOSH Pocket Guide International Chem Safety Card
Dichloroethyl etherexternal_link
NFPA 704
Diamond Hazard Value Description
2
3 1
Blue Health 3 Can cause serious or permanent injury.
Red Flammability 2 Must be moderately heated or exposed to relatively high ambient temperatures before ignition can occur.
Yellow Instability 1 Normally stable but can become unstable at elevated temperatures and pressures.
White Special
(NFPA, 2010)
General Description
A clear colorless liquid with a sweet pleasant or nauseating odor. Flash point 131°F. Denser than water and insoluble in water. Toxic by inhalation and skin absorption. Used in cleaning compounds, paints, textile finishing, and as a general solvent.

The Hazard fields include special hazard alerts air and water reactions, fire hazards, health hazards, a reactivity profile, and details about reactive groups assignments and potentially incompatible absorbents. The information in CAMEO Chemicals comes from a variety of data sources.
Reactivity Alerts
  • Peroxidizable Compound
Air & Water Reactions
Flammable. Insoluble in water. Reacts slowly with water to form HCl. Oxidizes readily in air to form unstable peroxides that may explode spontaneously [Bretherick, 1979 p.151-154].
Fire Hazard
May form phosgene or hydrogen chloride in fires. There is danger of explosion when ethers are heated or exposed to flames or sparks. Ethers tend to form peroxides; when ethers containing peroxides are heated, they can detonate. May be ignited by heat, sparks, or flames. Container may explode in heat of fire. Vapor explosion and poison hazard indoors, outdoors or in sewers. Decomposes in the presence of moisture to form hydrochloric acid. Emits toxic fumes when heated to decomposition. Reacts vigorously with oleum and chlorosulfonic acid. Ethers tend to form peroxides upon standing. Heating peroxide-containing ethers can cause detonation. (EPA, 1998)
Health Hazard
This material is very toxic; the probable oral lethal dose is 50-500 mg/kg, or between 1 teaspoonful and 1 ounce for a 150 pound person. It can be a central nervous system depressant in high concentrations. It is extremely irritating to the eyes, nose, and respiratory passages. It can penetrate the skin to cause serious and even fatal poisoning. Poisonous; may be fatal if inhaled, swallowed or absorbed through skin. (EPA, 1998)
Reactivity Profile
2,2'-DICHLORODIETHYL ETHER may form phosgene or hydrogen when heated to high temperature. Oxidizes readily in air to form unstable peroxides that may explode spontaneously [Bretherick, 1979 p.151-154]. Mixing in equal molar portions with the following substances in a closed container caused the temperature and pressure to increase: chlorosulfonic acid and oleum [NFPA 1991].
Belongs to the Following Reactive Group(s)
Potentially Incompatible Absorbents

No information available.

The Response Recommendation fields include isolation and evacuation distances, as well as recommendations for firefighting, non-fire response, protective clothing, and first aid. The information in CAMEO Chemicals comes from a variety of data sources.
Isolation and Evacuation
Excerpt from ERG Guide 152 [Substances - Toxic (Combustible)]:

IMMEDIATE PRECAUTIONARY MEASURE: Isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids.

SPILL: Increase the immediate precautionary measure distance, in the downwind direction, as necessary.

FIRE: If tank, rail tank car or highway tank is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2024)
Firefighting
Wear full protective clothing. Do not extinguish fire unless flow can be stopped. Cool all affected containers with flooding quantities of water. Apply water from as far a distance as possible.

Use water, foam, mist, fog, spray, or dry chemical. Use water in flooding quantities as fog. Small fires: dry chemical, carbon dioxide, water spray, or foam. Large fires: water spray, fog, or foam. Move container from fire area if you can do so without risk. Spray cooling water on containers that are exposed to flames until well after fire is out. Fight fire from maximum distance. Dike fire control water for later disposal; do not scatter the material. (EPA, 1998)
Non-Fire Response
Excerpt from ERG Guide 152 [Substances - Toxic (Combustible)]:

ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Stop leak if you can do it without risk. Prevent entry into waterways, sewers, basements or confined areas. Cover with plastic sheet to prevent spreading. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers. DO NOT GET WATER INSIDE CONTAINERS. (ERG, 2024)
Protective Clothing
Excerpt from NIOSH Pocket Guide for Dichloroethyl etherexternal link:

Skin: PREVENT SKIN CONTACT - Wear appropriate personal protective clothing to prevent skin contact.

Eyes: PREVENT EYE CONTACT - Wear appropriate eye protection to prevent eye contact.

Wash skin: WHEN CONTAMINATED - The worker should immediately wash the skin when it becomes contaminated.

Remove: WHEN WET OR CONTAMINATED - Work clothing that becomes wet or significantly contaminated should be removed and replaced.

Change: No recommendation is made specifying the need for the worker to change clothing after the workshift.

Provide:
• EYEWASH - Eyewash fountains should be provided in areas where there is any possibility that workers could be exposed to the substances; this is irrespective of the recommendation involving the wearing of eye protection.
• QUICK DRENCH - Facilities for quickly drenching the body should be provided within the immediate work area for emergency use where there is a possibility of exposure. [Note: It is intended that these facilities provide a sufficient quantity or flow of water to quickly remove the substance from any body areas likely to be exposed. The actual determination of what constitutes an adequate quick drench facility depends on the specific circumstances. In certain instances, a deluge shower should be readily available, whereas in others, the availability of water from a sink or hose could be considered adequate.] (NIOSH, 2024)
DuPont Tychem® Suit Fabrics
Tychem® Fabric Legend
QS = Tychem 2000 SFR
QC = Tychem 2000
SL = Tychem 4000
C3 = Tychem 5000
TF = Tychem 6000
TP = Tychem 6000 FR
RC = Tychem RESPONDER® CSM
TK = Tychem 10000
RF = Tychem 10000 FR
Testing Details
The fabric permeation data was generated for DuPont by a third party laboratory. Permeation data for industrial chemicals is obtained per ASTM F739. Normalized breakthrough times (the time at which the permeation rate exceeds 0.1 μg/cm2/min) are reported in minutes. All chemicals have been tested between approximately 20°C and 27°C unless otherwise stated. All chemicals have been tested at a concentration of greater than 95% unless otherwise stated.
Chemical warfare agents (Lewisite, Sarin, Soman, Sulfur Mustard, Tabun and VX Nerve Agent) have been tested at 22°C and 50% relative humidity per military standard MIL-STD-282. "Breakthrough time" for chemical warfare agents is defined as the time when the cumulative mass which permeated through the fabric exceeds the limit in MIL-STD-282 [either 1.25 or 4.0 μg/cm2].
A Caution from DuPont
This information is based upon technical data that DuPont believes to be reliable on the date issued. It is subject to revision as additional knowledge and experience are gained. The information reflects laboratory performance of fabrics, not complete garments, under controlled conditions. It is intended for informational use by persons having technical skill for evaluation under their specific end-use conditions, at their own discretion and risk. It is the user's responsibility to determine the level of toxicity and the proper personal protective equipment needed. Anyone intending to use this information should first verify that the garment selected is suitable for the intended use. In many cases, seams and closures have shorter breakthrough times and higher permeation rates than the fabric. If fabric becomes torn,abraded or punctured, or if seams or closures fail, or if attached gloves, visors, etc. are damaged, end user should discontinue use of garment to avoid potential exposure to chemical. Since conditions of use are outside our control, DuPont makes no warranties, express or implied, including, without limitation, no warranties of merchantability or fitness for a particular use and assume no liability in connection with any use of this information. This information is not intended as a license to operate under or a recommendation to infringe any patent, trademark or technical information of DuPont or others covering any material or its use.
Normalized Breakthrough Times (in Minutes)
Chemical CAS Number State QS QC SL C3 TF TP RC TK RF
Dichloro ethyl ether 111-44-4 Liquid >480 >480 >480 >480 >480 >480
> indicates greater than.

Special Warning from DuPont: Tychem® and Tyvek® fabrics should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Only...

...Tychem® ThermoPro, Tychem® Reflector® and Tychem® TK styles 600T/601T (with aluminized outer suit) garments are designed and tested to help reduce burn injury during escape from a flash fire. Users of Tychem® ThermoPro, Tychem® Reflector® and Tychem® TK styles 600T/601T (with aluminized outer suit) garments should not knowingly enter an explosive environment. Tychem® garments with attached socks must be worn inside protective outer footwear and are not suitable as outer footwear. These attached socks do not have adequate durability or slip resistance to be worn as the outer foot covering.

(DuPont, 2024)

First Aid
Signs and Symptoms of Dichloroethyl Ether Exposure: Acute exposure to dichloroethyl ether may produce the following signs and symptoms: irritation of the eyes, skin, and mucous membranes, profuse tearing, coughing, retching, and vomiting. Contact with skin and eyes may cause burns. Respiratory signs may include irritation of the respiratory tract, which may progress to pulmonary edema.

Emergency Life-Support Procedures: Acute exposure to dichloroethyl ether may require decontamination and life support for the victims. Emergency personnel should wear protective clothing appropriate to the type and degree of contamination. Air-purifying or supplied-air respiratory equipment should also be worn, as necessary. Rescue vehicles should carry supplies such as plastic sheeting and disposable plastic bags to assist in preventing spread of contamination.

Inhalation Exposure:
1. Move victims to fresh air. Emergency personnel should avoid self-exposure to dichloroethyl ether.
2. Evaluate vital signs including pulse and respiratory rate, and note any trauma. If no pulse is detected, provide CPR. If not breathing, provide artificial respiration. If breathing is labored, administer 100% humidified oxygen or other respiratory support.
3. Obtain authorization and/or further instructions from the local hospital for administration of an antidote or performance of other invasive procedures.
4. Transport to a health care facility.

Dermal/Eye Exposure:
1. Remove victims from exposure. Emergency personnel should avoid self-exposure to dichloroethyl ether.
2. Evaluate vital signs including pulse and respiratory rate, and note any trauma. If no pulse is detected, provide CPR. If not breathing, provide artificial respiration. If breathing is labored, administer 100% humidified oxygen or other respiratory support.
3. Remove and isolate contaminated clothing as soon as possible.
4. If eye exposure has occurred, eyes must be flushed with lukewarm water for at least 15 minutes.
5. Wash exposed skin areas thoroughly with soap and water.
6. Obtain authorization and/or further instructions from the local hospital for administration of an antidote or performance of other invasive procedures.
7. Transport to a health care facility.

Ingestion Exposure:
1. Evaluate vital signs including pulse and respiratory rate, and note any trauma. If no pulse is detected, provide CPR. If not breathing, provide artificial respiration. If breathing is labored, administer 100% humidified oxygen or other respiratory support.
2. Obtain authorization and/or further instructions from the local hospital for administration of an antidote or performance of other invasive procedures.
3. Vomiting may be induced with syrup of Ipecac. If elapsed time since ingestion of dichloroethyl ether is unknown or suspected to be greater than 30 minutes, do not induce vomiting and proceed to Step
4. Ipecac should not be administered to children under 6 months of age.Warning: Syrup of Ipecac should be administered only if victims are alert, have an active gag-reflex, and show no signs of impending seizure or coma. If ANY uncertainty exists, proceed to Step
4.The following dosages of Ipecac are recommended: children up to 1 year old, 10 mL (1/3 oz); children 1 to 12 years old, 15 mL (1/2 oz); adults, 30 mL (1 oz). Ambulate (walk) the victims and give large quantities of water. If vomiting has not occurred after 15 minutes, Ipecac may be readministered. Continue to ambulate and give water to the victims. If vomiting has not occurred within 15 minutes after second administration of Ipecac, administer activated charcoal.
4. Activated charcoal may be administered if victims are conscious and alert. Use 15 to 30 g (1/2 to 1 oz) for children, 50 to 100 g (1-3/4 to 3-1/2 oz) for adults, with 125 to 250 mL (1/2 to 1 cup) of water.
5. Promote excretion by administering a saline cathartic or sorbitol to conscious and alert victims. Children require 15 to 30 g (1/2 to 1 oz) of cathartic; 50 to 100 g (1-3/4 to 3-1/2 oz) is recommended for adults.
6. Transport to a health care facility. (EPA, 1998)

The Physical Property fields include properties such as vapor pressure and boiling point, as well as explosive limits and toxic exposure thresholds The information in CAMEO Chemicals comes from a variety of data sources.

Note: For Vapor Density and Specific Gravity, comparing the value to 1.0 can tell you if the chemical will likely sink/rise in air or sink/float in fresh water (respectively). Short phrases have been added to those values below as an aid. However, make sure to also consider the circumstances of a release. The Vapor Density comparisons are only valid when the gas escaping is at the same temperature as the surrounding air itself. If the chemical is escaping from a container where it was pressurized or refrigerated, it may first escape and behave as a heavy gas and sink in the air (even if it has a Vapor Density value less than 1). Also, the Specific Gravity comparisons are for fresh water (density 1.0 g/mL). If your spill is in salt water (density about 1.027 g/mL), you need to adjust the point of comparison. There are some chemicals that will sink in fresh water and float in salt water.
Chemical Formula:
  • C4H8Cl2O
Flash Point: 131°F (EPA, 1998)
Lower Explosive Limit (LEL): 2.7 % (NIOSH, 2024)
Upper Explosive Limit (UEL): data unavailable
Autoignition Temperature: 696°F (USCG, 1999)
Melting Point: -58°F (EPA, 1998)
Vapor Pressure: 0.7 mmHg at 68°F (EPA, 1998)
Vapor Density (Relative to Air): 4.93 (EPA, 1998) - Heavier than air; will sink
Specific Gravity: 1.22 at 68°F (EPA, 1998) - Denser than water; will sink
Boiling Point: 352°F at 760 mmHg (EPA, 1998)
Molecular Weight: 143.02 (EPA, 1998)
Water Solubility: Reaction (NTP, 1992)
Ionization Energy/Potential: data unavailable
IDLH: 100 ppm ; A potential occupational carcinogen. (NIOSH, 2024)

AEGLs (Acute Exposure Guideline Levels)

No AEGL information available.

ERPGs (Emergency Response Planning Guidelines)

No ERPG information available.

PACs (Protective Action Criteria)

Chemical PAC-1 PAC-2 PAC-3
Dichloroethyl ether; (1,1'-Oxybis(2-chloro)ethane; Bis(2-chloroethyl)ether) (111-44-4) 10 ppm 26 ppm 250 ppm LEL = 27000 ppm
(DOE, 2024)

The Regulatory Information fields include information from the U.S. Environmental Protection Agency's Title III Consolidated List of Lists, the U.S. Cybersecurity and Infrastructure Security Agency's Chemical Facility Anti-Terrorism Standards, and the U.S. Occupational Safety and Health Administration's Process Safety Management of Highly Hazardous Chemicals Standard List (see more about these data sources).

EPA Consolidated List of Lists

Regulatory Name CAS Number/
313 Category Code
EPCRA 302
EHS TPQ
EPCRA 304
EHS RQ
CERCLA RQ EPCRA 313
TRI
RCRA
Code
CAA 112(r)
RMP TQ
Bis(2-chloroethyl) ether 111-44-4 10000 pounds 10 pounds 10 pounds 313 U025
Dichloroethyl ether 111-44-4 10000 pounds 10 pounds 10 pounds X U025

(EPA List of Lists, 2024)

CISA Chemical Facility Anti-Terrorism Standards (CFATS)

No regulatory information available.

OSHA Process Safety Management (PSM) Standard List

No regulatory information available.

This section provides a listing of alternate names for this chemical, including trade names and synonyms.
  • BETA,BETA'-DICHLORODIETHYL ETHER
  • BETA,BETA'-DICHLOROETHYL ETHER
  • BETA,BETA-DICHLORODIETHYL ETHER
  • BIS (2-CHLOROETHYL) ETHER
  • BIS(2-CHLOROETHYL) ETHER
  • BIS(2-CHLOROETHYL)ETHER
  • BIS(BETA-CHLOROETHYL) ETHER
  • BIS(CHLORO-2-ETHYL) OXIDE
  • CHLOREX
  • 1-CHLORO-2-(2-CHLOROETHOXY)ETHANE
  • 1-CHLORO-2-(BETA-CHLOROETHOXY) ETHANE
  • 1-CHLORO-2-(BETA-CHLOROETHOXY)ETHANE
  • 2-(2-CHLOROETHOXY)ETHYL CHLORIDE
  • CHLOROETHYL ETHER
  • 2-CHLOROETHYL ETHER, DICHLOROETHYL OXIDE
  • 2-CHLOROETHYL ETHER
  • CLOREX
  • DCEE
  • DI(2-CHLOROETHYL) ETHER
  • DI(2-CHLOROETHYL)ETHER
  • DI(BETA-CHLOROETHYL) ETHER
  • DI(BETA-CHLOROETHYL)ETHER
  • DI-(2-CHLOROETHYL) ETHER
  • 2,2'-DICHLORETHYL ETHER
  • 1,5-DICHLORO-3-OXAPENTANE
  • DICHLORODIETHYL ETHER
  • 2,2'-DICHLORODIETHYL ETHER, 2,2'-DICHLOROETHYL ETHER
  • 2,2'-DICHLORODIETHYL ETHER
  • DICHLOROETHER
  • DICHLOROETHYL ETHER
  • 2,2'-DICHLOROETHYL ETHER
  • 2,2-DICHLOROETHYL ETHER
  • DICHLOROETHYL OXIDE
  • DIETHYLENE GLYCOL DICHLORIDE
  • ENT 4,504
  • ETHER, BIS(2-CHLOROETHYL)
  • ETHER, BIS(CHLOROETHYL)
  • 1,1'-OXYBIS(2-CHLORO)ETHANE
  • 1,1'-OXYBIS(2-CHLOROETHANE)
  • OXYGEN MUSTARD
  • SYM-DICHLOROETHYL ETHER

Contact Us | Website Satisfaction Surveyexternal_link

Version 3.1.0 rev 1