1,4-BUTANEDIOL
![](javascript:dropDownText("section1_info","section1_info_marker","/static/images/up_arrow.png","/static/images/down_arrow.png")){kind=icon}
![](javascript:dropDownText("sec1_help","sec1_help_marker","/static/images/dropdown_opened.gif","/static/images/dropdown_closed.gif"))
The
Chemical Identifier fields
include common identification numbers, the
NFPA diamond
U.S. Department of Transportation hazard labels, and a general
description of the chemical. The information in CAMEO Chemicals comes
from a variety of
data sources.
| CAS Number | UN/NA Number |
|---|---|
|
none |
| DOT Hazard Label | USCG CHRIS Code |
| data unavailable | |
| NIOSH Pocket Guide | International Chem Safety Card |
| none |
NFPA 704
| Diamond | Hazard | Value | Description | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Health
|
1 | Can cause significant irritation. | |||||||||
Flammability
|
1 | Must be preheated before ignition can occur. | ||||||||||
Instability
|
0 | Normally stable, even under fire conditions. | ||||||||||
Special
|
(NFPA, 2010)
General Description
Odorless colorless liquid or solid (depending upon temperature). (USCG, 1999)
![](javascript:dropDownText("section2_info","section2_info_marker","/static/images/up_arrow.png","/static/images/down_arrow.png")){kind=icon}
![](javascript:dropDownText("sec2_help","sec2_help_marker","/static/images/dropdown_opened.gif","/static/images/dropdown_closed.gif"))
The
Hazard fields
include
special hazard alerts
air and water
reactions, fire hazards, health hazards, a reactivity profile, and
details about
reactive groups assignments
and
potentially incompatible absorbents.
The information in CAMEO Chemicals comes from a variety of
data sources.
Reactivity Alerts
none
Air & Water Reactions
This chemical is hygroscopic. Water soluble.
Fire Hazard
Special Hazards of Combustion Products: Carbon dioxide and carbon monoxide may be produced in fire.
Behavior in Fire: Unstable with heat; may form flammable tetrahydrofuran at 300°F. (USCG, 1999)
Behavior in Fire: Unstable with heat; may form flammable tetrahydrofuran at 300°F. (USCG, 1999)
Health Hazard
Ingestion of large amounts needed to produce any symptoms. (USCG, 1999)
Reactivity Profile
1,4-BUTANEDIOL is heat and light sensitive. This compound reacts with acid chlorides, acid anhydrides and chloroformates. It also reacts with oxidizing agents and reducing agents. It is incompatible with isocyanates and acids. It is also incompatible with peroxides, perchloric acid, sulfuric acid, hypochlorous acid, nitric acid, caustics, acetaldehyde, nitrogen peroxide and chlorine. (NTP, 1992)
Belongs to the Following Reactive Group(s)
Potentially Incompatible Absorbents
Use caution: Liquids with this reactive group classification have been known to react with the absorbent listed below. More info about absorbents, including situations to watch out for...
- Cellulose-Based Absorbents
![](javascript:dropDownText("section3_info","section3_info_marker","/static/images/up_arrow.png","/static/images/down_arrow.png")){kind=icon}
![](javascript:dropDownText("sec3_help","sec3_help_marker","/static/images/dropdown_opened.gif","/static/images/dropdown_closed.gif"))
The
Response Recommendation fields
include isolation and evacuation distances, as well as recommendations for
firefighting, non-fire response, protective clothing, and first aid. The
information in CAMEO Chemicals comes from a variety of
data sources.
Isolation and Evacuation
No information available.
Firefighting
Fire Extinguishing Agents Not to Be Used: Water or foam may cause frothing.
Fire Extinguishing Agents: Alcohol foam, dry chemical or carbon dioxide. (USCG, 1999)
Fire Extinguishing Agents: Alcohol foam, dry chemical or carbon dioxide. (USCG, 1999)
Non-Fire Response
No information available.
Protective Clothing
Eye protection and rubber gloves. (USCG, 1999)
DuPont Tychem® Suit Fabrics
No information available.
First Aid
EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.
SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.
INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing.
INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)
SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.
INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing.
INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)
![](javascript:dropDownText("section4_info","section4_info_marker","/static/images/up_arrow.png","/static/images/down_arrow.png")){kind=icon}
![](javascript:dropDownText("sec4_help","sec4_help_marker","/static/images/dropdown_opened.gif","/static/images/dropdown_closed.gif"))
The
Physical Property fields
include properties such as vapor pressure and
boiling point, as well as explosive limits and
toxic exposure thresholds
The information in CAMEO Chemicals comes from a variety of
data sources.
Note: For Vapor Density and Specific Gravity, comparing the value to 1.0 can tell you if the chemical will likely sink/rise in air or sink/float in fresh water (respectively). Short phrases have been added to those values below as an aid. However, make sure to also consider the circumstances of a release. The Vapor Density comparisons are only valid when the gas escaping is at the same temperature as the surrounding air itself. If the chemical is escaping from a container where it was pressurized or refrigerated, it may first escape and behave as a heavy gas and sink in the air (even if it has a Vapor Density value less than 1). Also, the Specific Gravity comparisons are for fresh water (density 1.0 g/mL). If your spill is in salt water (density about 1.027 g/mL), you need to adjust the point of comparison. There are some chemicals that will sink in fresh water and float in salt water.
Note: For Vapor Density and Specific Gravity, comparing the value to 1.0 can tell you if the chemical will likely sink/rise in air or sink/float in fresh water (respectively). Short phrases have been added to those values below as an aid. However, make sure to also consider the circumstances of a release. The Vapor Density comparisons are only valid when the gas escaping is at the same temperature as the surrounding air itself. If the chemical is escaping from a container where it was pressurized or refrigerated, it may first escape and behave as a heavy gas and sink in the air (even if it has a Vapor Density value less than 1). Also, the Specific Gravity comparisons are for fresh water (density 1.0 g/mL). If your spill is in salt water (density about 1.027 g/mL), you need to adjust the point of comparison. There are some chemicals that will sink in fresh water and float in salt water.
| Chemical Formula: |
|
Flash Point:
247°F
(NTP, 1992)
Lower Explosive Limit (LEL):
1.9 %
(USCG, 1999)
Upper Explosive Limit (UEL): data unavailable
Autoignition Temperature:
671°F
(USCG, 1999)
Melting Point:
61°F
(NTP, 1992)
Vapor Pressure:
less than 1 mmHg
at 100°F
(NTP, 1992)
Vapor Density (Relative to Air):
3.1
(NTP, 1992)
- Heavier than air; will sink
Specific Gravity:
1.017
at 68°F
(USCG, 1999)
- Denser than water; will sink
Boiling Point:
446°F
at 760 mmHg
(NTP, 1992)
Molecular Weight:
90.12
(NTP, 1992)
Water Solubility:
greater than or equal to 100 mg/mL
at 73°F
(NTP, 1992)
Ionization Energy/Potential: data unavailable
IDLH: data unavailable
AEGLs (Acute Exposure Guideline Levels)
No AEGL information available.ERPGs (Emergency Response Planning Guidelines)
No ERPG information available.PACs (Protective Action Criteria)
| Chemical | PAC-1 | PAC-2 | PAC-3 | |
|---|---|---|---|---|
| Butanediol, 1,4-; (1,4-Tetramethylene glycol) (110-63-4) | 4.7 mg/m3 | 52 mg/m3 | 640 mg/m3 | LEL = 19500 ppm |
(DOE, 2018)
![](javascript:dropDownText("section5_info","section5_info_marker","/static/images/up_arrow.png","/static/images/down_arrow.png")){kind=icon}
![](javascript:dropDownText("sec5_help","sec5_help_marker","/static/images/dropdown_opened.gif","/static/images/dropdown_closed.gif"))
The
Regulatory Information fields
include information from
the U.S. Environmental Protection Agency's Title III Consolidated List of
Lists,
the U.S. Cybersecurity and Infrastructure Security Agency's Chemical Facility
Anti-Terrorism Standards,
and the U.S. Occupational Safety and Health Administration's
Process Safety Management of Highly Hazardous Chemicals Standard List
(see more about these
data sources).
EPA Consolidated List of Lists
No regulatory information available.CISA Chemical Facility Anti-Terrorism Standards (CFATS)
No regulatory information available.OSHA Process Safety Management (PSM) Standard List
No regulatory information available.![](javascript:dropDownText("section6_info","section6_info_marker","/static/images/up_arrow.png","/static/images/down_arrow.png")){kind=icon}
![](javascript:dropDownText("sec6_help","sec6_help_marker","/static/images/dropdown_opened.gif","/static/images/dropdown_closed.gif"))
This section provides a listing of alternate names for this chemical,
including trade names and synonyms.
- BUTANE-1,4-DIOL
- BUTANEDIOL
- 1,4-BUTANEDIOL
- BUTYLENE GLYCOL
- 1,4-BUTYLENE GLYCOL
- DABCO DBO
- DIHYDROXYBUTANE
- 1,4-DIHYDROXYBUTANE
- DIOL 14B
- POLYCURE D
- SUCOL B
- TETRAMETHYLENE 1,4-DIOL
- TETRAMETHYLENE GLYCOL
- 1,4-TETRAMETHYLENE GLYCOL
Version 3.0.0