Get the app in the App Store and on Google Play!

UN/NA 1052

8 - Corrosive 6.1 - Poison

The Emergency Response Guidebook (ERG) provides general response recommendations for first responders.

UN/NA datasheets display several items from the ERG: material names, response guide PDFs, initial isolation and protective action distances, warnings about toxic-by-inhalation gases that may be produced if the material spills in water, and polymerization hazards.

A caution icon. The ERG recommendations are developed for use during the initial phase of transportation incidents; they are not intended for spills at facilities.

Response Guide 125

link to a PDF file Gases - Toxic and/or Corrosive

Material Names

  • Hydrogen fluoride, anhydrous

ERG Table 1: Initial Isolation and Protective Action Distances

Name of Material Small Spills
(from a small package or small leak)
Large Spills
(from a large package or many small packages)
First
Isolate
in all Directions
Then Protect Downwind First
Isolate
in all Directions
Then Protect Downwind
Day Night Day Night
Hydrogen fluoride, anhydrous 100 ft 0.1 mi 0.3 mi Refer to Table 3

The ERG doesn't predict that large amounts of toxic-by-inhalation gases will be produced if this material is spilled in water.

ERG Table 3: Initial Isolation and Protective Action Distances for Different Quantities of Six Common Toxic-by-Inhalation Gases

UN1052 Hydrogen fluoride, anhydrous: Large Spills
Transport Container First
Isolate
in all Directions
Then Protect Downwind
Day Night
Low Wind
(<6 mph)
Moderate Wind
(6-12 mph)
High Wind
(>12 mph)
Low Wind
(<6 mph)
Moderate Wind
(6-12 mph)
High Wind
(>12 mph)
Rail tank car 1500 ft 2.1 mi 1.3 mi 1.1 mi 4.0 mi 1.9 mi 1.2 mi
Highway tank truck or trailer 700 ft 1.2 mi 0.7 mi 0.6 mi 2.3 mi 1.0 mi 0.6 mi
Multiple small cylinders or single ton cylinder 300 ft 0.5 mi 0.2 mi 0.2 mi 1.1 mi 0.3 mi 0.2 mi

Map the ERG's Initial Isolation and Protective Action Distances

Use this tool to see the ERG green table values (above) on a map, and you can also export the map objects as a KML file. See the ERG Distances (PDF) for information on using these values and how they were created.

Set the spill location by typing an address or coordinates into the box in the panel, or by clicking a location on the map. Then use the choices in the panel to provide additional details about the release.

  • DAY is between sunrise and sunset.
  • SMALL spills are 55 US gallons (208 liters) or less.
  • Enter the direction FROM which the WIND is blowing.
  • LOW wind is less than 6 miles per hour (less than 10 kilometers/hour), MODERATE wind is 6-12 mph (10-20 km/h), and HIGH wind is greater than 12 mph (greater than 20 km/h).

Note: These distances are for spills where there is no fire involved.

When a fire is involved, the ERG developers state that you should use EVACUATION value in the appropriate orange ERG Response Guide for the initial isolation distance. Then also PROTECT in the downwind direction according to the green Table 1 (or Table 3) value for residual material release.

The Hazmat Table in 49 CFR 172.101 "lists and classifies those materials which the Department (of Transportation) has designated as hazardous materials for purposes of transportation".

UN/NA datasheets display several items from the Hazmat Table: proper shipping names, hazard classes and divisions (explosives may also include a compatibility group letter label codes, and special notes relating to shipping location, shipping name, and whether the material is an inhalation hazard.

Descriptive text for each label code is shown below the table, along with representative vehicle placards.

UN/NA Proper Shipping Name Hazard Class Labels Notes*

* There are three notes: (1) whether the displayed information is for domestic (U.S.) or international shipping (if neither is specifically indicated, it applies to both), (2) whether the proper shipping name must include one or more technical names of the hazardous material in parentheses, and (3) whether the hazardous material is an inhalation hazard.
UN Hydrogen fluoride, anhydrous 8 8, 6.1 Inhalation Hazard Zone C

  8 - Corrosive

  6.1 - Poison

Contact Us | Website Satisfaction Surveyexternal_link

Version 3.1.0 rev 1